XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Shimming clutch bell https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7552 |
Page 1 of 1 |
Author: | tenore1 [ Wed Apr 23, 2008 18:21:21 ] |
Post subject: | Shimming clutch bell |
Author: | Jason Branham [ Wed Apr 23, 2008 20:41:51 ] |
Post subject: | |
Thats alot of play to have just on the bearing, thats even more than I have with the clutch bell shimmed. The amount of play you should have with everything screwed down to the crank shaft should be about a 32nd. How old is the clutch bell? How old are the bearings? |
Author: | blade954 [ Thu Apr 24, 2008 01:50:37 ] |
Post subject: | |
Author: | lauri [ Thu Apr 24, 2008 08:13:28 ] |
Post subject: | |
Author: | Keith [ Thu Apr 24, 2008 20:13:22 ] |
Post subject: | |
End all shim kit,,,they even toss in the 0.1 shims, so you can set it perfectly. ![]() Ihttp://www.amainhobbies.com/product_in ... ts_id/4142 I have about 3 combined Ofna shim kits, they only give you a few of the 0.1's |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |