| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT8 Gear mesh https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7548 |
Page 1 of 1 |
| Author: | opliko [ Wed Apr 23, 2008 07:09:10 ] |
| Post subject: | XT8 Gear mesh |
I don't know why, but the gear mesh on my xt8 never seems to be very good. How I adjust it is loosen the screws under the truck just enough that I can move the motor around on top, get the gear mesh correct, and tighten it down. The only problem is, is before I tighten the screws the mesh can be perfect, but after I tighten everything it somehow messes up the mesh. I even switched clutch bells(both 13t) to see if it helped but it didn't. Also a funny thing is when I first put it together the mesh was fine, but it was with a different motor. First I had a Werks .28, and now I have an O.S. .21 VG in it. The VG seems to have a longer crank which puts the clutch bell a little farther forward on the spur gear. Could that be my problem? I have the black aluminum motor mount on my XB8, I could try using that. |
|
| Author: | lauri [ Wed Apr 23, 2008 09:11:00 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|