| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Help with the question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7459 |
Page 1 of 1 |
| Author: | HulkRay [ Thu Apr 10, 2008 19:52:45 ] |
| Post subject: | Help with the question |
| Author: | MALLET [ Thu Apr 10, 2008 20:20:38 ] |
| Post subject: | |
| Author: | Keith [ Thu Apr 10, 2008 20:22:01 ] |
| Post subject: | |
| Author: | HulkRay [ Thu Apr 10, 2008 20:44:00 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Thu Apr 10, 2008 20:57:53 ] |
| Post subject: | |
| Author: | Bren Ralls [ Thu Apr 10, 2008 21:54:07 ] |
| Post subject: | |
Hulkray I run Odonnel 30 % in my OS & find it a very good fuel. It does seem to leave an oil type deposit but as posted earlier all fuels will corrode the bearings over time if you do not use after run. Myself if the engine is to be used the following weekend then i generally do nothing, if its left longer for more than a week then it gets well oiled. To oil what i do is remove air filter & close up carb, I fill the insert area fully with oil & allow to drop into engine. I do this twice & then just turn engine over by mand to make sure bearings & well soaked. Some people say just put a few drops through engine plug but i feel this does not do the job . Every one has there own method but for me this has worked well & proven reliable. Bren |
|
| Author: | HulkRay [ Fri Apr 11, 2008 00:03:22 ] |
| Post subject: | |
| Author: | blade954 [ Fri Apr 11, 2008 01:34:50 ] |
| Post subject: | |
| Author: | dbarnes [ Fri Apr 11, 2008 02:37:47 ] |
| Post subject: | |
It's true with any filled crank. You should use mineral oil. |
|
| Author: | blade954 [ Fri Apr 11, 2008 04:12:55 ] |
| Post subject: | |
would parifin oil be ok ? |
|
| Author: | whitey4311 [ Fri Apr 11, 2008 05:34:38 ] |
| Post subject: | |
| Author: | BRIAN77 [ Fri Apr 11, 2008 08:18:25 ] |
| Post subject: | |
has any one use hobicco after run oil that the guys use for there air plane and helicopter engines BRIAN |
|
| Author: | wirtz88 [ Fri Apr 11, 2008 16:35:13 ] |
| Post subject: | |
| Author: | Keith [ Fri Apr 11, 2008 17:03:41 ] |
| Post subject: | |
| Author: | Bren Ralls [ Fri Apr 11, 2008 19:13:08 ] |
| Post subject: | |
| Author: | pncstod [ Sun Apr 13, 2008 13:18:09 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|