| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8 gearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7321 |
Page 1 of 1 |
| Author: | guy02 [ Thu Mar 20, 2008 17:25:43 ] |
| Post subject: | XB8 gearing |
I run a 38T gear in the front diff can I put a 43T truggy gear in the rear to give even more frontdrive or what would that do ?? |
|
| Author: | motorboyduc [ Thu Mar 20, 2008 22:06:17 ] |
| Post subject: | gear |
| Author: | rcjunky10 [ Thu Mar 20, 2008 23:00:25 ] |
| Post subject: | Gearing...! |
| Author: | Oli [ Fri Mar 21, 2008 01:37:29 ] |
| Post subject: | |
| Author: | dbarnes [ Fri Mar 21, 2008 02:12:16 ] |
| Post subject: | |
| Author: | rcjunky10 [ Fri Mar 21, 2008 03:28:57 ] |
| Post subject: | |
| Author: | MikeIz [ Tue Mar 25, 2008 05:44:46 ] |
| Post subject: | |
Intresting! hey guys, i've tried different setups, diff oils etc. and have gotten the EC to handle better but it's still twitchy is this the problem you guys were having? |
|
| Author: | MikeIz [ Tue Mar 25, 2008 05:51:23 ] |
| Post subject: | Re: Gearing...! |
[quote="rcjunky10"]If you look at Ryan Lopez's setup you will see that he is running truggy gears throughout his buggy, i.e. 43/10 crown/pinion, and on the clutch bell/spur gear 16/44. for the change i would need: 2 43t crown gears 2 10t pinion gears 1 16t clutch bell 1 44t spur gear that should be every thing right? thanks guys!! i'll be using a stock v-spec |
|
| Author: | Leon McIntosh [ Tue Mar 25, 2008 05:55:18 ] |
| Post subject: | |
mike that is correct and until the xray clutch bells in 16 and 17 are availible racers edge makes a cheap alternative that last pretty good. i think they are only 11 dollars for one |
|
| Author: | MikeIz [ Tue Mar 25, 2008 06:12:27 ] |
| Post subject: | |
hi leon, thanks for the quick reply! since i run the truggy too i should have almost everything i need. what diff oils are you guys running? i'm currently running 7/5/3 thanks! |
|
| Author: | rcjunky10 [ Tue Mar 25, 2008 07:30:32 ] |
| Post subject: | Re: Gearing...! |
| Author: | MikeIz [ Tue Mar 25, 2008 17:12:37 ] |
| Post subject: | |
| Author: | rcjunky10 [ Wed Mar 26, 2008 18:34:31 ] |
| Post subject: | |
| Author: | kilana [ Fri Mar 28, 2008 03:53:13 ] |
| Post subject: | |
| Author: | Leon McIntosh [ Fri Mar 28, 2008 05:22:49 ] |
| Post subject: | |
| Author: | rcjunky10 [ Fri Mar 28, 2008 05:38:27 ] |
| Post subject: | |
| Author: | Bren Ralls [ Fri Mar 28, 2008 09:00:48 ] |
| Post subject: | |
| Author: | MikeIz [ Fri Mar 28, 2008 20:58:20 ] |
| Post subject: | |
| Author: | kilana [ Sat Mar 29, 2008 01:02:04 ] |
| Post subject: | |
| Author: | rcjunky10 [ Sat Mar 29, 2008 04:12:01 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|