| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8EC starter box for XT8 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7269 |
Page 1 of 1 |
| Author: | XB8ECinAR [ Mon Mar 10, 2008 20:36:39 ] |
| Post subject: | XB8EC starter box for XT8 |
| Author: | XB8ECinAR [ Mon Mar 10, 2008 20:49:24 ] |
| Post subject: | |
If the box doesn't line up for the truggy I was looking at this Nova motor with the roto-start. It's underpowered, but I run on a very tight, slippery track.... Would the roto start with this motor work in the XT8. Can you get at the back plate to start it? Thanks again |
|
| Author: | Bren Ralls [ Mon Mar 10, 2008 20:49:54 ] |
| Post subject: | |
the chsssis on the XB8 & XT8 are different lengths, so if your box is spot on for the buggy it will not match your truggy. some people leave one pin out to compromise & move the car around on the box but this can be fiddly if your pit man is not used to it. I run two boxes as i cant be bothered to keep adjusting. As for the rota start never used one so cant commnet to help. Bren |
|
| Author: | XB8ECinAR [ Mon Mar 10, 2008 20:55:00 ] |
| Post subject: | |
| Author: | Bren Ralls [ Mon Mar 10, 2008 20:56:39 ] |
| Post subject: | |
| Author: | 2props [ Mon Mar 10, 2008 22:06:38 ] |
| Post subject: | |
You could try this, I made a fibreglass tray formed over the chassis then trimmed it to fit then bolted it down the starter box, It fits both XT8 & XB8 so you only need one starter box. i can email you some pics if you need more info I would put the pics on the forum if i new how 
or if someone can give me a crash course let me know & will post them. Sean |
|
| Author: | Kane-o [ Tue Mar 11, 2008 02:14:24 ] |
| Post subject: | |
| Author: | HulkRay [ Tue Mar 11, 2008 02:37:09 ] |
| Post subject: | |
| Author: | Kane-o [ Tue Mar 11, 2008 06:18:07 ] |
| Post subject: | |
| Author: | Chris Russell [ Tue Mar 11, 2008 09:26:03 ] |
| Post subject: | |
| Author: | Glenn Phuah [ Tue Mar 11, 2008 10:25:41 ] |
| Post subject: | |
| Author: | 4xAdict [ Tue Mar 11, 2008 14:47:13 ] |
| Post subject: | |
| Author: | Qball [ Tue Mar 11, 2008 16:14:00 ] |
| Post subject: | Re: XB8EC starter box for XT8 |
| Author: | Michael Tan [ Tue Mar 11, 2008 18:38:12 ] |
| Post subject: | |
| Author: | Richmond [ Mon Apr 07, 2008 06:47:05 ] |
| Post subject: | |
| Author: | rcjunky10 [ Mon Apr 07, 2008 14:40:09 ] |
| Post subject: | |
| Author: | Oli [ Mon Apr 07, 2008 14:52:36 ] |
| Post subject: | |
| Author: | lauri [ Mon Apr 07, 2008 19:44:09 ] |
| Post subject: | Re: XB8EC starter box for XT8 |
| Author: | Andy Taylor [ Mon Apr 07, 2008 23:52:26 ] |
| Post subject: | Re: XB8EC starter box for XT8 |
| Author: | 2props [ Tue Apr 08, 2008 23:12:58 ] |
| Post subject: | |
A couple of pics of the fibreglass tray i made for the XT8 & XB8EC excuse the mud 
XB8EC XT8 Sean |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|