| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Rear hub problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7043 |
Page 1 of 1 |
| Author: | jono_EC [ Sun Feb 03, 2008 11:20:42 ] |
| Post subject: | Rear hub problem |
Hey guys, I’m having a problem with my Rear Lower Outer Pivot Pin. I have it happen to me 3 times now. Some times when i flip or jump the pin comes out and i loss my shims. This has happened once when I went off some woops and landed a bit heavy on one side and it came out. Then happened once when I was hit up the rear and just came out again. The last time it happened is when I clipped a corner and went flying and revving the engine to try land the right way up. It worked but the pin came out again. Why is this?? Cheers, Jono |
|
| Author: | Craige Lewis [ Sun Feb 03, 2008 11:29:18 ] |
| Post subject: | |
Jono... on the allen key bolts that hold the pin in put a larger diameter wash under it should stop it from pushing past the pin  some time the arm flexes and ipops out from the in side if thats the case i would say its time to put some new rear arms on it as they may be stretched now dude! Hope this help you out
Craige |
|
| Author: | jono_EC [ Sun Feb 03, 2008 11:48:14 ] |
| Post subject: | |
| Author: | rallyraid [ Sun Feb 03, 2008 16:19:16 ] |
| Post subject: | |
| Author: | jono_EC [ Mon Feb 04, 2008 00:04:37 ] |
| Post subject: | |
| Author: | Chris Russell [ Mon Feb 04, 2008 05:23:31 ] |
| Post subject: | |
| Author: | jono_EC [ Mon Feb 04, 2008 10:18:34 ] |
| Post subject: | |
| Author: | nudge38 [ Mon Feb 04, 2008 10:59:27 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|