| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Hinge pins on the EC https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6876 |
Page 1 of 1 |
| Author: | whitey4311 [ Mon Jan 07, 2008 06:55:55 ] |
| Post subject: | Hinge pins on the EC |
| Author: | whitey4311 [ Mon Jan 07, 2008 07:04:45 ] |
| Post subject: | |
| Author: | brano [ Mon Jan 07, 2008 10:34:48 ] |
| Post subject: | |
You will need these pins for your XRAY XB8EC: #357212 - 2x, #357221 - 1x, #357230 - 1x and #357330 - 1x. The #353112 and #353122 arms are used in the XRAY XB8EC and also in the XRAY XB8TQ. |
|
| Author: | daz.fx [ Mon Jan 07, 2008 10:56:07 ] |
| Post subject: | |
I think i suffer from the same condition so your not on your own. I found it depends how even you put the screws in the back plate, it's possible to get them the same. |
|
| Author: | whitey4311 [ Mon Jan 07, 2008 16:45:45 ] |
| Post subject: | |
| Author: | whitey4311 [ Mon Jan 07, 2008 16:49:06 ] |
| Post subject: | |
| Author: | brano [ Mon Jan 07, 2008 17:37:36 ] |
| Post subject: | |
| Author: | whitey4311 [ Mon Jan 07, 2008 18:10:04 ] |
| Post subject: | |
| Author: | whitey4311 [ Mon Jan 07, 2008 18:11:49 ] |
| Post subject: | |
| Author: | brano [ Mon Jan 07, 2008 18:25:36 ] |
| Post subject: | |
| Author: | whitey4311 [ Mon Jan 07, 2008 18:31:45 ] |
| Post subject: | |
| Author: | Stanley Wangsanegara [ Tue Jan 08, 2008 06:06:36 ] |
| Post subject: | |
| Author: | whitey4311 [ Tue Jan 08, 2008 07:33:16 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|