| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Truggy Gearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6737 |
Page 1 of 1 |
| Author: | Eelco [ Mon Dec 10, 2007 22:46:46 ] |
| Post subject: | Truggy Gearing |
| Author: | showtime [ Mon Dec 10, 2007 23:31:16 ] |
| Post subject: | |
| Author: | Stanley Wangsanegara [ Tue Dec 11, 2007 03:33:44 ] |
| Post subject: | |
Eelco, Are You trying to put Truggy gearing on Your Buggy? If So, You need to change both the pinion (10T) and the bevel gear (43T) in the gear box and also You need a 44T spur gear with 16T clutch bell to achieve about the same as the original Gear Ratio. |
|
| Author: | Leon McIntosh [ Tue Dec 11, 2007 04:19:07 ] |
| Post subject: | |
| Author: | blade954 [ Tue Dec 11, 2007 04:56:51 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Tue Dec 11, 2007 16:00:33 ] |
| Post subject: | |
| Author: | Andy Taylor [ Tue Dec 11, 2007 22:42:48 ] |
| Post subject: | |
| Author: | blade954 [ Wed Dec 12, 2007 00:48:43 ] |
| Post subject: | |
| Author: | MDJammin [ Thu Dec 13, 2007 01:54:18 ] |
| Post subject: | |
| Author: | blade954 [ Thu Dec 13, 2007 02:13:36 ] |
| Post subject: | |
| Author: | Chris Russell [ Fri Dec 14, 2007 01:47:40 ] |
| Post subject: | |
| Author: | blade954 [ Fri Dec 14, 2007 01:58:17 ] |
| Post subject: | |
| Author: | Chris Russell [ Fri Dec 14, 2007 02:00:34 ] |
| Post subject: | |
| Author: | blade954 [ Fri Dec 14, 2007 02:03:43 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|