| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT8: Wheels with Excessive Play? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6339 |
Page 1 of 2 |
| Author: | speed metal [ Fri Oct 05, 2007 16:00:51 ] |
| Post subject: | XT8: Wheels with Excessive Play? |
| Author: | Rocco Margiotta [ Fri Oct 05, 2007 19:45:40 ] |
| Post subject: | |
| Author: | speed metal [ Sat Oct 06, 2007 05:30:57 ] |
| Post subject: | |
| Author: | WheelNut [ Sun Oct 07, 2007 22:58:50 ] |
| Post subject: | |
| Author: | speed metal [ Mon Oct 08, 2007 03:17:13 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Mon Oct 08, 2007 04:19:20 ] |
| Post subject: | |
| Author: | speed metal [ Mon Oct 08, 2007 04:24:50 ] |
| Post subject: | |
| Author: | ChrisP [ Mon Oct 08, 2007 04:26:39 ] |
| Post subject: | |
| Author: | Keith [ Mon Oct 08, 2007 07:15:09 ] |
| Post subject: | |
| Author: | speed metal [ Mon Oct 08, 2007 17:16:24 ] |
| Post subject: | |
| Author: | ChrisP [ Mon Oct 08, 2007 18:57:23 ] |
| Post subject: | |
| Author: | speed metal [ Mon Oct 08, 2007 19:07:44 ] |
| Post subject: | |
Thanks Chris. If all goes well I will be going to the Strathroy race. Anyways, I made a quick video with my digital camera. That way you can see what I'm talking about. Sorry about the quality as I'm a complete newb when it comes to digi video.  That was the first vid I've made and uploaded LOL!! So sorry again for the quality, but I think it'll give you a good idea of what I'm talking about. I only show the rear wheels but all four wheels are like that. Here's the link:
regards speed metal |
|
| Author: | ToysRUsKid [ Mon Oct 08, 2007 20:42:00 ] |
| Post subject: | |
| Author: | whitey4311 [ Tue Oct 09, 2007 03:44:58 ] |
| Post subject: | |
| Author: | sneh [ Tue Oct 09, 2007 12:18:20 ] |
| Post subject: | |
i dont know if xray do them, but kyosho does a shim kit that has shims to take that play out.. BS53 is the part #.. it has a few diff shims as well.. i had to use them on my STR when i bought dodgy aftermarket alloy hubs. i ran them between the inside bearing and the shaft so as to not affect the offset. |
|
| Author: | speed metal [ Tue Oct 09, 2007 16:28:51 ] |
| Post subject: | |
| Author: | whitey4311 [ Tue Oct 09, 2007 16:33:47 ] |
| Post subject: | |
| Author: | Keith [ Tue Oct 09, 2007 18:46:34 ] |
| Post subject: | |
| Author: | speed metal [ Wed Oct 10, 2007 20:49:28 ] |
| Post subject: | Found the problem! |
| Author: | whitey4311 [ Thu Oct 11, 2007 00:19:36 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|