| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT8 Question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6289 |
Page 1 of 1 |
| Author: | HulkRay [ Wed Sep 26, 2007 05:26:44 ] |
| Post subject: | XT8 Question |
| Author: | dezertracer [ Wed Sep 26, 2007 07:03:45 ] |
| Post subject: | xt8 truggy |
| Author: | HulkRay [ Wed Sep 26, 2007 12:49:17 ] |
| Post subject: | Re: xt8 truggy |
| Author: | blade954 [ Wed Sep 26, 2007 13:03:03 ] |
| Post subject: | |
| Author: | gtsum [ Wed Sep 26, 2007 14:15:06 ] |
| Post subject: | |
| Author: | Keith [ Wed Sep 26, 2007 18:24:46 ] |
| Post subject: | |
| Author: | HulkRay [ Thu Sep 27, 2007 00:17:14 ] |
| Post subject: | |
| Author: | gtsum [ Thu Sep 27, 2007 01:11:49 ] |
| Post subject: | |
| Author: | Rosco [ Thu Sep 27, 2007 07:10:36 ] |
| Post subject: | |
| Author: | Keith [ Thu Sep 27, 2007 17:40:10 ] |
| Post subject: | |
| Author: | HulkRay [ Wed Oct 03, 2007 13:14:45 ] |
| Post subject: | Re: xt8 truggy |
| Author: | HulkRay [ Tue Oct 09, 2007 01:02:48 ] |
| Post subject: | |
What Quick Start Starter Box Plate would work with the XT8??? Thanks |
|
| Author: | MikeIz [ Tue Oct 09, 2007 03:37:30 ] |
| Post subject: | |
| Author: | slickrcpilot [ Tue Oct 09, 2007 06:34:28 ] |
| Post subject: | |
| Author: | sneh [ Tue Oct 09, 2007 12:38:53 ] |
| Post subject: | |
yep, .21s are the go in truggies... no need for a .28... i have a 928 that i bought and ran in, its a pig to tune and keep happy and destroys 1.1 clutch springs like they're twigs coz of the ridiculous power even with the 7mm venturi.. Its definately not a beginners motor, you'd want to be pretty good with your tuning.. its the most sensitive motor i've tried to tune as far as needle increments go.. half an hour usually makes a difference. esp on the low speed.. my modded ws7 III has more then enough power, with a powerband more like a c6, and 928s dont chase me down up the straight, and i'm running a 12 tooth bell/50 tooth spur and 2020 pipe against their 13/48's with 2045 pipe.. my 928 has been sitting in the box since i got the ws7. also, the idle screw on the 928 is in a bitch of a spot for truggies, the pipe is in the way. Rody says you can use a c6 carb on it if you have dramas getting to the idle screw. |
|
| Author: | HulkRay [ Thu Oct 11, 2007 13:23:04 ] |
| Post subject: | |
| Author: | whitey4311 [ Thu Oct 11, 2007 15:42:40 ] |
| Post subject: | |
| Author: | HulkRay [ Thu Oct 11, 2007 18:43:15 ] |
| Post subject: | |
| Author: | whitey4311 [ Fri Oct 12, 2007 04:25:02 ] |
| Post subject: | |
| Author: | dezertracer [ Fri Oct 12, 2007 04:35:18 ] |
| Post subject: | starter plate |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|