XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
steering locked https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6280 |
Page 1 of 2 |
Author: | DaleJrRocks8 [ Tue Sep 25, 2007 02:14:45 ] |
Post subject: | steering locked |
I was driving the car and noticed when i came off a jump that the steering locked to the right and would come loose which ended my heat. I noticed that the 352651 Ball Stud 5.8mm With Backstop - V2 (2) was stuck on the lower pin holder and i had to pry it out 3 times. I run my inner tie rods all the way forward on the ackerman plate. Anyone else have this happen to them? Am I supposed to have this ball stud with the backstop on the inner tie rods? Any information would be helpful Thanks JR |
Author: | Jlong [ Tue Sep 25, 2007 02:34:15 ] |
Post subject: | |
Author: | whitey4311 [ Tue Sep 25, 2007 03:15:54 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Tue Sep 25, 2007 06:47:27 ] |
Post subject: | |
Author: | whitey4311 [ Tue Sep 25, 2007 08:18:46 ] |
Post subject: | |
Author: | Jlong [ Tue Sep 25, 2007 12:46:12 ] |
Post subject: | |
Author: | whitey4311 [ Tue Sep 25, 2007 15:48:38 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue Sep 25, 2007 17:58:54 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Tue Sep 25, 2007 19:33:57 ] |
Post subject: | |
Author: | Bren Ralls [ Tue Sep 25, 2007 21:01:33 ] |
Post subject: | |
Author: | Keith [ Tue Sep 25, 2007 21:23:09 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Wed Sep 26, 2007 06:39:49 ] |
Post subject: | |
Author: | Bren Ralls [ Wed Sep 26, 2007 08:09:02 ] |
Post subject: | |
Author: | Robin Frischkopf [ Wed Sep 26, 2007 18:32:03 ] |
Post subject: | |
Author: | Jlong [ Wed Sep 26, 2007 22:42:53 ] |
Post subject: | |
Author: | Jason Branham [ Wed Sep 26, 2007 23:59:00 ] |
Post subject: | |
Author: | whitey4311 [ Thu Sep 27, 2007 00:16:11 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Thu Sep 27, 2007 01:56:55 ] |
Post subject: | |
Author: | Bren Ralls [ Thu Sep 27, 2007 10:06:13 ] |
Post subject: | |
Author: | Jason Branham [ Thu Sep 27, 2007 14:59:16 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |