| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Servo to EC buggy https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6268 |
Page 1 of 1 |
| Author: | Roy.Arnold [ Sat Sep 22, 2007 16:37:09 ] |
| Post subject: | Servo to EC buggy |
Hi all. I have a Xray XB 8 EC. First of all i will say this is a very good Buggy. I use to Trottle futaba 3305 and for strearing Futaba S9351. It`s work`s fine. BUT!!!! What are your exsperience for servo in this car? Best Regard Roy |
|
| Author: | whitey4311 [ Sat Sep 22, 2007 16:45:54 ] |
| Post subject: | |
So far I love my Ace servos which are .10 speed and 200 oz torque. They have fat heat synchs on them and I have no complaints but they are very new still. Seems many others love them so I gave them a try. I used Hitec 5955 before on a Revo and loved it too. If I have any issues with these servos I would most likely go back to those or KOpropo since I hear those are the highest quality. |
|
| Author: | sneh [ Mon Sep 24, 2007 01:03:43 ] |
| Post subject: | |
KO or Ace is the way to go. The supplied horns fit better on KO then the futaba ones on the Ace's. A couple of people down my way have had issues with the aces glitching with HRS spektrum at centre. seemed to be fixed by changing the exponential a tad so its not so sensitive around centre. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|