| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| fed up with push clutch https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6263 |
Page 1 of 1 |
| Author: | channah [ Fri Sep 21, 2007 14:37:25 ] |
| Post subject: | fed up with push clutch |
So I bought a Peak Racing adjustable clutch when I recieved my xb8. My problem is this...Unless I have the clutch set very tight for late engagement, I have to shim the heck out of it in order for the clutch bell to spin freely. I'm talking like a mm, so a bunch of clutch shims for that. The collet for the flywheel is already a short one, so I either need a longer shaft from the motor, or I may even ditch the stinkin thing for a regular clutch and flywheel. I like it, but when I do shim it, the screw hits the tank, and I'm not a fan of having a ton of shims to make up for a mm. |
|
| Author: | channah [ Fri Sep 21, 2007 15:03:06 ] |
| Post subject: | |
| Author: | whitey4311 [ Fri Sep 21, 2007 16:43:03 ] |
| Post subject: | |
| Author: | CarbonJoe [ Fri Sep 21, 2007 17:09:28 ] |
| Post subject: | |
| Author: | CMF [ Fri Sep 21, 2007 17:10:18 ] |
| Post subject: | |
| Author: | whitey4311 [ Fri Sep 21, 2007 17:41:33 ] |
| Post subject: | |
| Author: | CMF [ Fri Sep 21, 2007 17:43:41 ] |
| Post subject: | |
| Author: | whitey4311 [ Fri Sep 21, 2007 18:17:54 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|