What do you guys recommend for a reliable digital throttle servo for my xt8? I have a Hitec 5996TG which burnt up in 4month of use
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Throttle Servo for XT8 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6261 |
Page 1 of 1 |
| Author: | kmaspeed [ Fri Sep 21, 2007 06:12:30 ] |
| Post subject: | Throttle Servo for XT8 |
What do you guys recommend for a reliable digital throttle servo for my xt8? I have a Hitec 5996TG which burnt up in 4month of use
|
|
| Author: | whitey4311 [ Fri Sep 21, 2007 07:09:53 ] |
| Post subject: | |
I am using the Ace digital servo and I bought it after reading and hearing so many good things about them. The tech support at Amain swears by them and say they last a long time. One guy I talked to said 30+ gallons then he changed it out for an updated model but it still worked fine. Maybe 111 oz torque isnt enough for constantly applying brakes and throttle but the Ace is 200 torque with the same .10 transit speed. You will have to dremel and dink with the included Ace horns to get them to work but once you get it they are perfect. I had to shim the horn up on the servo splines and dremel a bit. I took some pics that are on here if you just do a search under my name. |
|
| Author: | Kahuna77 [ Fri Sep 21, 2007 07:12:38 ] |
| Post subject: | |
JR 9000S for T/B and JR 9000t for steering |
|
| Author: | whitey4311 [ Fri Sep 21, 2007 07:22:32 ] |
| Post subject: | |
No heat sync on those from what I see and if you read the reviews on Amain a guy that has Ace and that JR prefers Ace. Also I have heard there is such thing as too fast for throttle and it can choke up the carb. In the reviews they guy said he had to turn the speed down most likely for that reason. I guess there are always choices but what I was looking at is the Hitec 5955 which I had in a Revo but the Robotics version can take 7.4v for Lipos with no regulator. That would be cool enough to make me consider a change if my regulator ever gives me problems. What are you using for your steering? http://www.amainhobbies.com/product_rev ... ts_id/3826 |
|
| Author: | kmaspeed [ Fri Sep 21, 2007 08:41:25 ] |
| Post subject: | |
whitney where did you post your pictures at? I cant find them >< |
|
| Author: | ers [ Fri Sep 21, 2007 09:22:37 ] |
| Post subject: | |
I use ACE1015 for both throttle and steering without any problems... |
|
| Author: | Keith [ Fri Sep 21, 2007 16:24:38 ] |
| Post subject: | |
| Author: | whitey4311 [ Fri Sep 21, 2007 16:39:11 ] |
| Post subject: | |
| Author: | CarbonJoe [ Fri Sep 21, 2007 17:17:39 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Fri Sep 21, 2007 19:17:36 ] |
| Post subject: | |
| Author: | RGonzalez [ Fri Sep 21, 2007 20:29:38 ] |
| Post subject: | |
| Author: | Richmond [ Fri Sep 21, 2007 21:51:29 ] |
| Post subject: | |
| Author: | gtsum [ Sat Sep 22, 2007 03:43:50 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|