| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Recommend shorter screws to mount motor? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6200 |
Page 1 of 1 |
| Author: | ToysRUsKid [ Tue Sep 11, 2007 16:04:52 ] |
| Post subject: | Recommend shorter screws to mount motor? |
| Author: | rallyraid [ Tue Sep 11, 2007 18:23:03 ] |
| Post subject: | |
why not just grind the bolt a mm shorter. |
|
| Author: | ToysRUsKid [ Tue Sep 11, 2007 19:37:30 ] |
| Post subject: | |
I guess i can, i was worried about having them too short or slanted somehow. |
|
| Author: | Oli [ Wed Sep 12, 2007 12:37:13 ] |
| Post subject: | |
| Author: | RobBj123 [ Wed Sep 12, 2007 19:06:01 ] |
| Post subject: | |
IF you want to shorten a screw, screw a nut on the screw before shortening it. This way, when you are done, you can unscrew the nut and redo the threads at the end of the screw. Otherwise, the screw might mess up your motor mounts. But why not just walk into the next (decent) hardware store and buy four 12.9 screws that will fit? Those will cost like 0.10$ each... |
|
| Author: | Rocco Margiotta [ Wed Sep 12, 2007 19:17:52 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Wed Sep 12, 2007 19:31:45 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|