XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB8EC diff. leak https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6171 |
Page 1 of 1 |
Author: | Jlong [ Fri Sep 07, 2007 20:36:10 ] |
Post subject: | XB8EC diff. leak |
Author: | Leon McIntosh [ Fri Sep 07, 2007 21:43:36 ] |
Post subject: | |
Author: | Jlong [ Fri Sep 07, 2007 21:57:30 ] |
Post subject: | |
Author: | Keith [ Fri Sep 07, 2007 22:21:20 ] |
Post subject: | |
Author: | Jlong [ Fri Sep 07, 2007 23:23:03 ] |
Post subject: | |
Author: | Craige Lewis [ Sat Sep 08, 2007 01:36:04 ] |
Post subject: | |
Author: | Jlong [ Sat Sep 08, 2007 02:21:36 ] |
Post subject: | |
Author: | whitey4311 [ Sat Sep 08, 2007 03:07:39 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Sat Sep 08, 2007 05:48:58 ] |
Post subject: | |
Author: | Jlong [ Sat Sep 08, 2007 06:05:48 ] |
Post subject: | |
Author: | whitey4311 [ Sat Sep 08, 2007 07:50:35 ] |
Post subject: | |
Author: | tony montana [ Sat Sep 08, 2007 16:57:47 ] |
Post subject: | |
Author: | Keith [ Sat Sep 08, 2007 17:38:13 ] |
Post subject: | |
Author: | dbarnes [ Sat Sep 08, 2007 23:49:08 ] |
Post subject: | |
I build my diffs like the manual says including tightening the screws until the diff is the length according to the guidelines pointed out in the manual. Done this way I never have leaking diffs and I will go 4 gallons without even touching them. And I never use any grease or anything on the diffs or do any kind of polishing or anything. Take that for what it's worth but I have been running these same diffs in my TQ for two years. |
Author: | Stanley Wangsanegara [ Sun Sep 09, 2007 10:44:36 ] |
Post subject: | |
Author: | Jlong [ Sun Sep 09, 2007 19:12:39 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |