XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
RIMS rubbing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6161 |
Page 1 of 2 |
Author: | ROBBIE D. [ Fri Sep 07, 2007 01:16:56 ] |
Post subject: | RIMS rubbing |
Author: | Richmond [ Fri Sep 07, 2007 02:23:53 ] |
Post subject: | |
Author: | ROBBIE D. [ Fri Sep 07, 2007 05:12:55 ] |
Post subject: | |
Author: | Oli [ Fri Sep 07, 2007 10:51:30 ] |
Post subject: | |
I'll second that. All the sets of rims I use (they are all XRAY) rub against the steering rod end. I groove is starting to appear on the offset end (which already looks weaker than the standard rod end) after just 3 race meetings. When the car is off the track, at full throw the inside edge of the rim is about 3mm away from the rod end? |
Author: | Keith [ Fri Sep 07, 2007 19:57:20 ] |
Post subject: | |
Author: | Richmond [ Fri Sep 07, 2007 20:35:52 ] |
Post subject: | |
Author: | bigblock [ Fri Sep 07, 2007 20:47:33 ] |
Post subject: | |
Author: | Oli [ Wed Sep 12, 2007 12:46:42 ] |
Post subject: | |
Author: | ers [ Wed Sep 12, 2007 14:48:05 ] |
Post subject: | |
Author: | 180 booker [ Thu Sep 13, 2007 02:48:05 ] |
Post subject: | |
Author: | bigblock [ Thu Sep 13, 2007 11:49:55 ] |
Post subject: | |
Author: | Oli [ Thu Sep 13, 2007 12:46:53 ] |
Post subject: | |
Author: | goatranced [ Fri Oct 05, 2007 17:25:00 ] |
Post subject: | |
Author: | 180 booker [ Fri Oct 05, 2007 23:31:46 ] |
Post subject: | |
Author: | Dafni [ Fri Oct 05, 2007 23:50:19 ] |
Post subject: | |
Author: | grahama89 [ Sun Oct 07, 2007 00:32:07 ] |
Post subject: | |
Author: | akaver [ Sun Oct 07, 2007 23:35:23 ] |
Post subject: | |
Author: | HulkRay [ Mon Oct 08, 2007 02:05:27 ] |
Post subject: | |
Author: | Dafni [ Mon Oct 08, 2007 11:18:35 ] |
Post subject: | |
Author: | 180 booker [ Tue Oct 09, 2007 02:34:54 ] |
Post subject: | |
i have not had to replace my rod ends yet as the rubbing is not that extreme. i would just like to know if some of the team drivers are having this problem or not. |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |