XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XT8-Bent chassis? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6128 |
Page 1 of 1 |
Author: | tian [ Sat Sep 01, 2007 21:25:26 ] |
Post subject: | XT8-Bent chassis? |
Hi When I put a ruler along the bottom of my chassis it lines up with a gap of 2.5mm in the rear. Is this normal? Should it be bent like that or is it getting worn out? /Christian |
Author: | damon [ Sat Sep 01, 2007 21:28:08 ] |
Post subject: | |
how did you manage to do that? i have never broke a thing on my XT8 |
Author: | tian [ Sat Sep 01, 2007 21:41:43 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Sat Sep 01, 2007 22:16:33 ] |
Post subject: | |
Author: | sllo [ Sat Sep 01, 2007 22:49:15 ] |
Post subject: | |
Author: | tian [ Sat Sep 01, 2007 23:16:39 ] |
Post subject: | |
Author: | ers [ Sat Sep 01, 2007 23:28:25 ] |
Post subject: | |
Author: | speed metal [ Sun Sep 02, 2007 14:15:33 ] |
Post subject: | |
Author: | Leon McIntosh [ Mon Sep 03, 2007 06:26:47 ] |
Post subject: | |
try unscrewing the rear brace completely and then check it to see if that is actually the problem good this is though, its a truggy not a touring car bolt it together and just run ie but i do see your concern leon mcintosh |
Author: | ers [ Mon Sep 03, 2007 09:35:21 ] |
Post subject: | |
Author: | sllo [ Mon Sep 03, 2007 10:09:26 ] |
Post subject: | |
Author: | carlo71 [ Mon Sep 03, 2007 18:33:05 ] |
Post subject: | |
Author: | Keith [ Mon Sep 03, 2007 18:57:08 ] |
Post subject: | |
Author: | CarbonJoe [ Mon Sep 03, 2007 19:37:39 ] |
Post subject: | |
Author: | Richmond [ Mon Sep 03, 2007 21:45:13 ] |
Post subject: | |
Same goes for my spare chassis here. Must have been alot of rear end bottom slapping action going on 'round there. |
Author: | carlo71 [ Mon Sep 03, 2007 21:46:04 ] |
Post subject: | |
WHEWWW... now i can sleep ,,, thanks joe! |
Author: | ers [ Tue Sep 04, 2007 09:14:30 ] |
Post subject: | |
Keith - > The car has been treated with care. My rear end isnĀ“t as worn as tians. I tend to go over all screws on my car every now and then and none has been loose or is missing. It appears that the bend in the chassi start somewhere around the center diff... // Anders |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |