| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Diff set up? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6116 |
Page 1 of 1 |
| Author: | Paul Ramsey [ Thu Aug 30, 2007 20:52:16 ] |
| Post subject: | Diff set up? |
| Author: | Rocco Margiotta [ Thu Aug 30, 2007 21:42:34 ] |
| Post subject: | |
| Author: | tqmodels [ Thu Aug 30, 2007 22:31:43 ] |
| Post subject: | |
| Author: | Paul Ramsey [ Fri Aug 31, 2007 05:23:42 ] |
| Post subject: | |
| Author: | Keith [ Fri Aug 31, 2007 18:18:28 ] |
| Post subject: | |
| Author: | WheelNut [ Tue Sep 04, 2007 07:18:21 ] |
| Post subject: | |
I've never shimmed any of mine before, never ever had a problem, or abnormal wear. |
|
| Author: | whitey4311 [ Tue Sep 04, 2007 07:35:43 ] |
| Post subject: | |
I used 1 shim in the directions to close the gap and it worked fine. I dont think it may be needed but 1 shim added means a tighter gear mesh with still no binding so I added it. 2 shims caused it to bind and no shims could have been a bit tighter so the 1 shim worked perfect for me. I just put them in the bulkheads with out screwing it all down and before I added all the oil or screws to the diff cups and test fitted them first. It worked great and my mesh seems to be good so far. |
|
| Author: | Paul Ramsey [ Tue Sep 04, 2007 21:54:41 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|