XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Ride Height and Droop https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6094 |
Page 1 of 1 |
Author: | gtsum [ Mon Aug 27, 2007 04:54:27 ] |
Post subject: | Ride Height and Droop |
Author: | Jlong [ Mon Aug 27, 2007 05:58:57 ] |
Post subject: | |
this is a question I have too-where are we supposed to measure from-particularly in the front-do we measure from the flat part of the chassis like just behind the arms, or the front where it is bent upwards a little? |
Author: | Kahuna77 [ Mon Aug 27, 2007 07:23:22 ] |
Post subject: | |
I just take a ruler and rasie the chassis to the point of the wheels almost leaving the ground. Ruff tracks I tend to use full drop and vise versa on smooth. |
Author: | sllo [ Mon Aug 27, 2007 07:56:35 ] |
Post subject: | |
I use a caliber to measure droop and ride height droop: http://rc411.com/pages/howto.php?howto=30&page=1 ride height: http://rc411.com/pages/howto.php?howto=36&page=1 |
Author: | gtsum [ Mon Aug 27, 2007 19:10:16 ] |
Post subject: | |
Author: | gtsum [ Mon Aug 27, 2007 19:14:33 ] |
Post subject: | |
Author: | YoYARX [ Mon Aug 27, 2007 22:37:42 ] |
Post subject: | |
Author: | Jlong [ Tue Aug 28, 2007 04:29:06 ] |
Post subject: | |
You would generally measure the flat spot (lowest part in the front). In most all the setup sheets I have seen for this truggy, there does not seem to be specific measurements for droop and or ride height??[quote] I dont have any experience with the truggy-but the buggy set up sheets I've seen usually show ride height, as well as droop. Thanks for the answer. |
Author: | mario [ Wed Aug 29, 2007 16:53:27 ] |
Post subject: | |
Author: | kmaspeed [ Wed Aug 29, 2007 16:54:47 ] |
Post subject: | |
Author: | dbarnes [ Mon Sep 10, 2007 18:27:19 ] |
Post subject: | |
Author: | WheelNut [ Mon Sep 10, 2007 20:56:28 ] |
Post subject: | |
Author: | mario [ Fri Sep 14, 2007 09:37:33 ] |
Post subject: | |
Author: | brano [ Wed Sep 19, 2007 10:26:54 ] |
Post subject: | |
The new droop gauges for 1/8 off-road buggies are sending to all distributors, more info you can find here |
Author: | Keith [ Wed Sep 19, 2007 12:37:03 ] |
Post subject: | |
Really nice pieces as always, thanks!. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |