| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT8 Body Posts... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6063 |
Page 1 of 1 |
| Author: | Richmond [ Wed Aug 22, 2007 07:00:14 ] |
| Post subject: | XT8 Body Posts... |
| Author: | Kane-o [ Wed Aug 22, 2007 08:32:24 ] |
| Post subject: | |
| Author: | Jason Branham [ Wed Aug 22, 2007 14:44:41 ] |
| Post subject: | |
| Author: | Keith [ Wed Aug 22, 2007 16:48:07 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Wed Aug 22, 2007 17:03:44 ] |
| Post subject: | |
| Author: | Jason Branham [ Wed Aug 22, 2007 20:08:56 ] |
| Post subject: | |
| Author: | tian [ Wed Aug 22, 2007 20:35:35 ] |
| Post subject: | |
This mod will help. |
|
| Author: | carlo71 [ Thu Aug 23, 2007 03:03:48 ] |
| Post subject: | |
hey richmond i used a drill and drilled all the way thru the existing hole and used a 22 mm long 3mm button head and put a nut on the backside , then cut off the lil tab for the bottom and drilled that out and added a 3 mm wood screw 8mm long .. Never had a problem since!! 
|
|
| Author: | 2DMaxLST [ Thu Aug 23, 2007 07:43:40 ] |
| Post subject: | |
Here is what I have done.. |
|
| Author: | Rocco Margiotta [ Thu Aug 23, 2007 16:48:34 ] |
| Post subject: | |
Done! |
|
| Author: | Richmond [ Thu Aug 23, 2007 17:25:17 ] |
| Post subject: | |
| Author: | RGonzalez [ Thu Aug 23, 2007 18:02:11 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Thu Aug 23, 2007 18:13:32 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|