| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Replace plastic servo horns with aluminum https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6049 |
Page 1 of 1 |
| Author: | ToysRUsKid [ Mon Aug 20, 2007 20:20:36 ] |
| Post subject: | Replace plastic servo horns with aluminum |
does anyone here use the Dynamite aluminum servo horns instead of the stock plastics? I'm thinking of replacing them because I recently had the plastic horn strip on me and I don't want this to happen with the XT8. |
|
| Author: | Rocco Margiotta [ Mon Aug 20, 2007 21:38:39 ] |
| Post subject: | |
I have heard they work well... |
|
| Author: | Keith [ Mon Aug 20, 2007 22:52:56 ] |
| Post subject: | |
| Author: | robknasel [ Tue Aug 21, 2007 00:56:58 ] |
| Post subject: | |
I had always agreed with the idea that if the servo saver had been subjected to enough force to strip the horn, then it is better to strip a horn, then to strip a servo gear. I use Futaba Digital Servos and they are expensive so I would rather sacrifice a horn. |
|
| Author: | WheelNut [ Tue Aug 21, 2007 08:27:27 ] |
| Post subject: | |
I had one of the dynamite horns, but it was kind sloppy so I never used it. I really like the horns that are included with Airtronics servos. |
|
| Author: | bigblock [ Tue Aug 21, 2007 09:27:08 ] |
| Post subject: | |
| Author: | Keith [ Tue Aug 21, 2007 14:24:22 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Tue Aug 21, 2007 21:51:01 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|