you need this code to save $20 since I didnt get to use it due to not having subscribed to the news letter.
Your welcome,
CALPAUG25
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT8 purchase... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6044 |
Page 1 of 1 |
| Author: | JamminFan [ Sun Aug 19, 2007 20:55:22 ] |
| Post subject: | XT8 purchase... |
As the name implies Im a Jammin Fan but Im about to jump ship and grab the new XT8...while I add this new truggy in my cart at www.amainhobbies.com Im courious to know if theres anything else I really need to hook this truggy up... I have on the bench waiting: HiTec HS5945MG T&B HiTec HS5955TG Steering CEO Modded Novarossi PX5 w/ Novarossi 9886 pipe & long manifold. All I think I need is some paint and Im ready to go. Any thoughts....all suggestions welcome. Thank You |
|
| Author: | MikeIz [ Sun Aug 19, 2007 21:17:34 ] |
| Post subject: | |
hi, i made the jump too. you're gonna really like the change. the truck is quicker and more nimble around the turns. not to mention the quality is outstanding! Enjoy! also, there's plenty of support which is cool! |
|
| Author: | whitey4311 [ Sun Aug 19, 2007 21:25:10 ] |
| Post subject: | |
you need this code to save $20 since I didnt get to use it due to not having subscribed to the news letter. Your welcome,
CALPAUG25 |
|
| Author: | JamminFan [ Sun Aug 19, 2007 21:40:53 ] |
| Post subject: | |
thanks for the unput guys...and thnx whitey...I have that same code in my email box. I've bought tons o stuff from em....So you guys think the kit alone is enuff...I know some kits you want to add a couple extras to it.....you guys finding anything that may need to be thrown in the pit box or is this trug the bulletproff like the CRT?? TY Guys. |
|
| Author: | kmaspeed [ Sun Aug 19, 2007 22:22:59 ] |
| Post subject: | |
You might also wanna get the aluminum suspension holder for the front and back. The kit comes with plastics with eclip holder, which is okay, but if you want more options for your kick up and rear toe settings, then you must get the aluminum set. Remember to get the pins and eccentric bushing for the aluminum set or else it wont work. |
|
| Author: | JamminFan [ Mon Aug 20, 2007 00:14:26 ] |
| Post subject: | |
| Author: | Keith [ Mon Aug 20, 2007 00:19:26 ] |
| Post subject: | |
| Author: | CarbonJoe [ Mon Aug 20, 2007 02:41:01 ] |
| Post subject: | |
| Author: | kmaspeed [ Mon Aug 20, 2007 09:05:43 ] |
| Post subject: | |
Parts Number: FRONT 352311 front plate 352320 Rear Plate 352315 Eccentric Bushing 357212 Lower inner Pin Rear 353312 front plate 353323 rear plate 352315 eccentric bushings 357212 lower inner pin |
|
| Author: | sneh [ Mon Aug 20, 2007 09:52:44 ] |
| Post subject: | |
.. ISS kit.. has everything you need... |
|
| Author: | chris3g [ Mon Aug 20, 2007 14:35:55 ] |
| Post subject: | |
| Author: | Keith [ Mon Aug 20, 2007 17:18:26 ] |
| Post subject: | |
| Author: | ToysRUsKid [ Mon Aug 20, 2007 20:17:55 ] |
| Post subject: | |
I would like to jump on this also but going through that spreadsheet to figure out what parts I need is going to lead to a mistake in the order. I thought I was onto something when sneh mentioned the set, but then it says those are old parts. Is there a set for the new parts? |
|
| Author: | Rocco Margiotta [ Mon Aug 20, 2007 21:41:05 ] |
| Post subject: | |
There is not /one/ complete set to complete the truck, it is better if you order the individual parts. I will make the list shortly... |
|
| Author: | Rocco Margiotta [ Mon Aug 20, 2007 21:46:31 ] |
| Post subject: | |
For the complete TQ (updated suspension pieces) here are the part numbers: 352311 – TQ Front Front Suspension Holder 352320 - Rear Front Suspension Holder 352332 – TQ Front Upper Pin Holder 353312 – TQ Front Rear (Anti-Squat) Holder 353323 – TQ Rear Rear (Toe) Holder Along with these pieces you will need eccentric pin inserts and hinge pins, unless you want to grind the stock ones down... 352315 - Eccentric Pin Inserts 357212 - Front/Rear Lower Inner Hinge Pins |
|
| Author: | ToysRUsKid [ Mon Aug 20, 2007 22:17:06 ] |
| Post subject: | PERFECT!!! |
| Author: | WheelNut [ Tue Aug 21, 2007 08:30:59 ] |
| Post subject: | |
Get a pack of pre-load clips as well, a pack of the 4mm shims for the arms, and a pack of eccentric bushings for spares in case you lose the kit parts. The one piece engine mount is a really good idea for the truggy since it will really reduce the amount of flex in the centre of the chassis, and there is quite a bit of flex there stock, bad for the gear mesh, but it makes the truck so nice to drive. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|