| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New XT8 Binding Issue https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=6032 |
Page 1 of 1 |
| Author: | goatranced [ Fri Aug 17, 2007 17:42:53 ] |
| Post subject: | New XT8 Binding Issue |
| Author: | Rocco Margiotta [ Fri Aug 17, 2007 17:51:05 ] |
| Post subject: | |
| Author: | goatranced [ Fri Aug 17, 2007 18:26:15 ] |
| Post subject: | |
Thanks for the quick reply. Some Pictures...I hope these work. Aaron |
|
| Author: | goatranced [ Fri Aug 17, 2007 18:28:08 ] |
| Post subject: | |
Ops...One more just relized I posted a dupe. |
|
| Author: | RGonzalez [ Fri Aug 17, 2007 18:49:37 ] |
| Post subject: | |
R the essentric bushings the same for both top n bottom front arms? |
|
| Author: | Rocco Margiotta [ Fri Aug 17, 2007 19:42:05 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Fri Aug 17, 2007 19:46:08 ] |
| Post subject: | |
This shim....... |
|
| Author: | goatranced [ Fri Aug 17, 2007 20:00:42 ] |
| Post subject: | |
Rocco, I removed that shim and moved it to rear. That helped some. Then I moved the shims on the upper arm around to make the upper arm move back and I got something that will work. That upper arm on the left is still 3mm forward compared with the left but it moves freely now. Thanks much! Aaron |
|
| Author: | Jason Branham [ Fri Aug 17, 2007 20:24:29 ] |
| Post subject: | |
Aaron, go ahead and try to get the other side to match what you have done on the side you were having problems with. Jason Branham |
|
| Author: | goatranced [ Sat Aug 18, 2007 02:14:20 ] |
| Post subject: | |
| Author: | Leon McIntosh [ Sat Aug 18, 2007 03:35:58 ] |
| Post subject: | |
| Author: | Keith [ Sat Aug 18, 2007 05:22:32 ] |
| Post subject: | |
| Author: | Jason Branham [ Sat Aug 18, 2007 16:49:53 ] |
| Post subject: | |
| Author: | goatranced [ Mon Aug 20, 2007 02:41:56 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|