XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Aluminum Adjustable Engine Mount Fitment guide. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5987 |
Page 1 of 2 |
Author: | speed metal [ Sun Aug 12, 2007 14:59:36 ] |
Post subject: | Aluminum Adjustable Engine Mount Fitment guide. |
Author: | whitey4311 [ Sun Aug 12, 2007 15:36:46 ] |
Post subject: | |
Author: | speed metal [ Mon Aug 13, 2007 02:51:57 ] |
Post subject: | |
Author: | whitey4311 [ Mon Aug 13, 2007 03:35:53 ] |
Post subject: | |
Author: | speed metal [ Mon Aug 13, 2007 15:43:43 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue Aug 14, 2007 17:40:50 ] |
Post subject: | |
Author: | whitey4311 [ Wed Aug 15, 2007 03:15:14 ] |
Post subject: | |
Author: | CarbonJoe [ Wed Aug 15, 2007 05:44:56 ] |
Post subject: | |
Author: | chris3g [ Wed Aug 15, 2007 06:08:43 ] |
Post subject: | |
if anyone is still confused about how the 2 mounts are different, maybe this will help |
Author: | Keith [ Wed Aug 15, 2007 06:40:46 ] |
Post subject: | |
Author: | Stanley Wangsanegara [ Wed Aug 15, 2007 06:44:43 ] |
Post subject: | |
Author: | speed metal [ Fri Aug 17, 2007 05:37:01 ] |
Post subject: | |
Great pic chris! Thank you! That's what these threads are all about. regards speed metal |
Author: | YoYARX [ Wed Aug 29, 2007 01:52:02 ] |
Post subject: | |
Author: | Rocco Margiotta [ Wed Aug 29, 2007 16:51:58 ] |
Post subject: | |
Author: | Robin Frischkopf [ Wed Aug 29, 2007 17:55:04 ] |
Post subject: | |
Another useful tip for the three-piece mount: Longer M3 screws fixing the top to the bottom mount to make use of all the thread in the bottom mount. This way you can tighten them up really good without ever worrying of stripping the thread. I dremeled some longer screws to exact spec for this. Aluminium screws are a very bad idea for this area, even titanium ones are. |
Author: | Keith [ Wed Aug 29, 2007 18:11:54 ] |
Post subject: | |
Good tip Robin, so long as it all lines up like it should with no bind. |
Author: | RobBj123 [ Fri Sep 14, 2007 09:05:04 ] |
Post subject: | |
Author: | Robin Frischkopf [ Fri Sep 14, 2007 12:16:46 ] |
Post subject: | |
Author: | dbarnes [ Mon Sep 17, 2007 00:31:41 ] |
Post subject: | |
Are the Team guys using this mount? I noticed in pictures of Yannick Aigoin's car that he isn't using it. The reason I asked is that I've always used it before but recently I took it off and I noticed it was slightly bent and could see signs of where the clutch bell was hitting it too. I also noticed that the screws in this mount loosen easier than with the stock mount.I am starting to think it is not worth using. |
Author: | Marzz [ Tue Dec 04, 2007 07:27:40 ] |
Post subject: | |
So let me get this right - 358712 - Aluminum Adjustable Engine Mount WILL fit Werks B7? I ordered this one, as I've been told (by a Werks sponsored driver) that the Werks is made (in part) by Sirio. |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |