| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| How could the XT8 be improved? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5960 |
Page 1 of 1 |
| Author: | Oli [ Mon Aug 06, 2007 15:41:12 ] |
| Post subject: | How could the XT8 be improved? |
| Author: | Oli [ Mon Aug 06, 2007 16:04:34 ] |
| Post subject: | Newly designed front body posts |
| Author: | Richmond [ Mon Aug 06, 2007 16:46:55 ] |
| Post subject: | |
| Author: | DaveH [ Mon Aug 06, 2007 19:53:08 ] |
| Post subject: | |
| Author: | Barracuda [ Mon Aug 06, 2007 22:16:41 ] |
| Post subject: | |
| Author: | Oli [ Tue Aug 07, 2007 11:15:32 ] |
| Post subject: | |
Good point DaveH. The diff shimming issue is ridiculous. I'm going to try that with the front body mounts when I get some more (as they're now predictably out of stock with the UK distributer). My only concern is that they have quite a severe chamfer at the bottom behind the plastic pin, so drilling a hole through there wont leave much material for a screw to go through? I tried simply drilling through the existing hole and putting a longer screw in, which helped a lot. Another minor mod is to remove the mount hole in the chassis for 125cc. Obviously the chassis' were already machined when they remoulded the 150cc tank, and I cant see anyone in the world using a 125cc tank in their XT8. |
|
| Author: | Dafni [ Tue Aug 07, 2007 11:22:44 ] |
| Post subject: | |
Some put the 125ml tank on for the qualifiers. |
|
| Author: | DaveH [ Tue Aug 07, 2007 21:56:12 ] |
| Post subject: | |
| Author: | DaveH [ Tue Aug 07, 2007 21:57:41 ] |
| Post subject: | |
| Author: | Dafni [ Tue Aug 07, 2007 21:59:36 ] |
| Post subject: | |
| Author: | DaveH [ Tue Aug 07, 2007 22:08:23 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|