XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
parts?? EC??? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5808 |
Page 1 of 2 |
Author: | DaleJrRocks8 [ Fri Jul 06, 2007 00:39:08 ] |
Post subject: | parts?? EC??? |
Author: | Rocco Margiotta [ Fri Jul 06, 2007 00:43:42 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Fri Jul 06, 2007 02:18:02 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Fri Jul 06, 2007 02:37:07 ] |
Post subject: | |
Author: | Keith [ Fri Jul 06, 2007 02:37:12 ] |
Post subject: | |
Author: | Tricksy [ Fri Jul 06, 2007 12:56:48 ] |
Post subject: | |
Author: | 180 booker [ Fri Jul 06, 2007 15:15:10 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Sat Jul 07, 2007 02:58:46 ] |
Post subject: | |
Author: | Keith [ Sat Jul 07, 2007 08:31:57 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Sat Jul 07, 2007 17:56:14 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Thu Jul 12, 2007 06:35:51 ] |
Post subject: | |
Author: | Keith [ Thu Jul 12, 2007 13:36:41 ] |
Post subject: | |
Apart from the Xray parts listing, it looks as though Carolina's has added a 12 tooth diff pinion, 40 tooth diff spur (hmmm ![]() |
Author: | DaleJrRocks8 [ Thu Jul 12, 2007 20:10:28 ] |
Post subject: | |
Author: | Jason Branham [ Thu Jul 12, 2007 23:47:19 ] |
Post subject: | |
Author: | guy02 [ Sat Jul 21, 2007 18:20:45 ] |
Post subject: | |
I got some 352663 new EC steeringjoints, I thought... says "relief steering ball joints 5.8 mm for M4" but these won't fit the tq steeringrods ???? I bought them because with the ec arms and increased radius the joints touch the wheels now... |
Author: | Rocco Margiotta [ Mon Jul 23, 2007 16:50:55 ] |
Post subject: | |
Those are for the truck... You can just touch the normal 352660's up with a dremel. |
Author: | DaleJrRocks8 [ Tue Jul 24, 2007 07:30:09 ] |
Post subject: | |
JB, Rocco, Is it better to run the same pistons for the front and rear shocks on the EC? ex.....1.4 front, 1.4 rear Or mismatch sizes to get the feel that we're looking for? ex...1.3 front, 1.4 rear??? I've seen alot of set-up sheets with the same sizes??? Thanks |
Author: | Rocco Margiotta [ Wed Jul 25, 2007 17:08:57 ] |
Post subject: | |
Author: | DaleJrRocks8 [ Wed Jul 25, 2007 17:22:47 ] |
Post subject: | |
Author: | Jason Branham [ Wed Jul 25, 2007 20:31:50 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |