XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
here comes my xt8 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5719 |
Page 1 of 1 |
Author: | dezertracer [ Wed Jun 20, 2007 07:05:38 ] |
Post subject: | here comes my xt8 |
Author: | Jason Branham [ Wed Jun 20, 2007 14:07:46 ] |
Post subject: | |
Author: | dezertracer [ Wed Jun 20, 2007 18:45:42 ] |
Post subject: | 21?? |
Author: | Jason Branham [ Wed Jun 20, 2007 20:26:11 ] |
Post subject: | |
Author: | Stanley Wangsanegara [ Thu Jun 21, 2007 04:31:48 ] |
Post subject: | Re: 21?? |
Author: | dezertracer [ Thu Jun 21, 2007 08:18:48 ] |
Post subject: | thanks |
Author: | dezertracer [ Sat Jun 23, 2007 00:27:07 ] |
Post subject: | yes its done |
well about 8 hours later my xt8 is finally complete ![]() ![]() ![]() ![]() |
Author: | carlo71 [ Tue Jun 26, 2007 01:22:25 ] |
Post subject: | |
Author: | dezertracer [ Tue Jun 26, 2007 06:06:33 ] |
Post subject: | i agree carlo |
Author: | 180 booker [ Tue Jun 26, 2007 15:52:37 ] |
Post subject: | |
Author: | Brian M [ Tue Jun 26, 2007 16:18:35 ] |
Post subject: | |
Author: | dezertracer [ Tue Jun 26, 2007 19:19:34 ] |
Post subject: | |
Author: | 180 booker [ Tue Jun 26, 2007 21:15:42 ] |
Post subject: | |
Author: | Brian M [ Tue Jun 26, 2007 22:59:25 ] |
Post subject: | |
Author: | carlo71 [ Wed Jun 27, 2007 02:20:41 ] |
Post subject: | |
Author: | Brian M [ Wed Jun 27, 2007 04:15:33 ] |
Post subject: | |
Author: | Stanley Wangsanegara [ Wed Jun 27, 2007 05:16:30 ] |
Post subject: | |
Author: | larjus [ Wed Jun 27, 2007 23:43:48 ] |
Post subject: | |
does anyone have a part number or info for the replacement cvd pins.ive measured the hellfire ones and they're approx 1mm too short. what you using guys ??? thanks in advance. |
Author: | 180 booker [ Thu Jun 28, 2007 02:50:51 ] |
Post subject: | |
i had asked this in the XT8 part of the forum. 180 booker wrote: wondering if anyone knows where i could purchase part number 98 0264 pin 2.5x14? they are the pins that hold the CVD together. lost one just before my main yesterday and need to get some replacements. checked b-main and team helotes and do not see them listed on either of there sites. Stormer Hobbies has them in stock. https://www.ssl-stormerhobbies.com/cgi- ... =XRA980264 I red Loctite'ed the setscrew for mine, and put some shrinkwrap over that section of the CVD in hopes that if the setscrew does come loose, that the shrinkwrap will help hold the pin in place. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |