XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
what is the proper servo arm for an airtronic servo? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=554 |
Page 1 of 1 |
Author: | livthemoment [ Fri Dec 03, 2004 06:52:02 ] |
Post subject: | what is the proper servo arm for an airtronic servo? |
hey there are arms for hitec, futaba, jr, but not airtronics... which throttle servo arm is best for an airtronics servo(4758) |
Author: | Booyah [ Fri Dec 03, 2004 09:05:01 ] |
Post subject: | |
It tells you in the instructions I think! No it dont I have airtronics 357 and I used the one with the K---Fits perfect |
Author: | showtime [ Fri Dec 03, 2004 09:12:31 ] |
Post subject: | |
JR, KO, Sanwa & Airtronics all share the 23 spline fitting! Hi-tec use 24 and Futaba use 25 splines! i'm not sure if the spline number was in the instructions but they do tell you which to use ![]() |
Author: | imaxx21 [ Fri Dec 03, 2004 09:18:27 ] |
Post subject: | |
yup what they said... |
Author: | Booyah [ Fri Dec 03, 2004 10:03:01 ] |
Post subject: | |
In the instructions it never mentions Airtronics?? But the one with the K on the arm is the one to use: Nice-N-tight ![]() |
Author: | direct_x [ Fri Dec 03, 2004 13:03:58 ] |
Post subject: | Re: what is the proper servo arm for an airtronic servo? |
Author: | Rich Panganiban [ Fri Dec 03, 2004 17:50:35 ] |
Post subject: | |
livthemoment, have you used a 94758 digital servo in a buggy before? The reason I ask is I haven't had any luck with digital servos. I stick to the analog ones, a 94359 for steering and a 94257 for throttle. Just my .02 |
Author: | grahama89 [ Sat Dec 04, 2004 00:13:05 ] |
Post subject: | |
I see a bandwagon that needs jumpin on here. Don't use the H or F ones they wont fit properly. |
Author: | livthemoment [ Wed Dec 08, 2004 07:36:36 ] |
Post subject: | |
Author: | imaxx21 [ Wed Dec 08, 2004 10:56:40 ] |
Post subject: | |
Author: | livthemoment [ Wed Dec 08, 2004 15:15:31 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |