XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
#352651 shorter thread V1 ball stud https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5529 |
Page 1 of 1 |
Author: | sgarvin [ Tue May 22, 2007 14:05:22 ] |
Post subject: | #352651 shorter thread V1 ball stud |
Anyone know if you can purchase this part with the shorter thread like that which came with the TQ? The reason I ask is that I run the alu knuckles on the EC and use the 2mm shim there. Problem is, if you remove the 2mm shim at the ackerman, the longer threads almost rub on the upper arm. I could cut the threads, but that Hudy spring steel is pretty tuff. Also I don't like butchering, rather have the shorter threads. Any of this make sense? |
Author: | Jason Branham [ Tue May 22, 2007 14:11:14 ] |
Post subject: | |
sgarvin, yes you should be able to purchase the shorter ball stud. JB |
Author: | sgarvin [ Tue May 22, 2007 14:25:54 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |