Xray XT8 Offsett Wheels?

Jason Branham · **Posted:** Mon May 07, 2007 20:23:28

Brian, The XT8 rims are the same as the Jammin wheels (1/2 off set). As far as the hub extenders I could not tell you what ones to get but even though the standard rims from Pro-line are 0 off-set it still appears that they have about a 1/4 off-set, so I would guess any hub adapter with 1/4 extension would match the XT8 wheel. Hope this helps.

Jason Branham

Brian M · **Joined:** Thu Aug 11, 2005 06:57:45 **Posts:** 265

It does. Thanks JB

Rocco Margiotta · **Posted:** Mon May 07, 2007 22:02:46

Heads up! The Jammin wheels are a little deeper than the XT8's wheels. The XT8 runs a 10 mm offset, if you wanted to match it with wider hubs, you will need to put a 6mm wider hub on the truck to get back to stock width with the proline standard offset wheels.

This for sure as I just measured them with calipers, you need a 6mm hub to get back to stock width when using proline wheels, which is very close to 1/4 inch.

Chris Crews · **Posted:** Tue May 08, 2007 03:36:37

Rocco is correct. I tested out some 6mm extenders for a K truck from king headz and all i had to do was drill the hole out for the axle pin and they were a direct fit. As a result i was able to put K style rims on with no problem what so ever. Xray has made their own offset exclusive to them. More offset than the K style and not as much as Jammin.

Brian M · **Joined:** Thu Aug 11, 2005 06:57:45 **Posts:** 265

Rocco Margiotta · **Posted:** Tue May 08, 2007 18:00:20

It's molded into them.

carlo71 · **Posted:** Wed May 09, 2007 01:41:32

Rocco Margiotta · **Posted:** Wed May 09, 2007 03:24:33

Brian M · **Joined:** Thu Aug 11, 2005 06:57:45 **Posts:** 265

Keith · **Posted:** Wed May 09, 2007 17:58:49

XRAY - Model racing cars

Xray XT8 Offsett Wheels?

Who is online