XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
what proline wheels for XT8 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5328 |
Page 1 of 1 |
Author: | akaver [ Mon Apr 23, 2007 07:59:52 ] |
Post subject: | what proline wheels for XT8 |
Author: | x-rayted [ Mon Apr 23, 2007 10:45:01 ] |
Post subject: | |
Author: | Rocco Margiotta [ Mon Apr 23, 2007 15:03:48 ] |
Post subject: | |
Please check out the other thread on this (I believe its the main truggy thread). XRay wheels are a 10mm offset. In a pinch (or indoors) the Pro-Line 1/2 inch offset wheels (the ones that are very close to the face of the rim) work. PLEASE NOTE THAT OFFSET IS MEASURE FROM THE CENTER LINE OF THE WHEEL NOT FROM THE OUTER FACE!!! THE ZERO OFFSET RIMS ARE THE ONES THAT ARE THE REALLY DEEP ONES!!! |
Author: | Keith [ Mon Apr 23, 2007 15:10:32 ] |
Post subject: | |
the 2692-04's will work, so I have been told. |
Author: | lockmouth [ Tue Apr 24, 2007 02:26:00 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue Apr 24, 2007 18:09:57 ] |
Post subject: | |
Whelp, their actual name for them and what the offset actually is different which led me astray... If you look at the diagrams on pro-line's website where they have all the dimensions, it says "Center Line Represents Zero Offset" which contradicts their actual names for the rims... If their center line ACTUALLY represented zero offset, then the 1/2" offset wheels would be 0 (zero) offset, and their standard (to which standard, I don't know) offset would actually be 1/2"... But whatever the industry standard says goes... All I know is the XRay wheel is 10mm deeper offset than the standard offset wheel which will make the truck 20mm more narrow with the standard offset wheels... |
Author: | lockmouth [ Tue Apr 24, 2007 18:14:52 ] |
Post subject: | |
I see what you are saying , but proline doesn't market them like that. The ones with the deep hole are lable 1/2 offset and the flush face wheels are labled standard. Just don't what some to get the wrong them because you are saying what is opposite to what is on the package. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |