XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Clutch Springs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5295 |
Page 1 of 1 |
Author: | sneh [ Thu Apr 19, 2007 01:42:59 ] |
Post subject: | Clutch Springs |
Author: | speed metal [ Thu Apr 19, 2007 06:06:36 ] |
Post subject: | Re: Clutch Springs |
edit cause I can't read LOL!! |
Author: | dbarnes [ Thu Apr 19, 2007 06:16:29 ] |
Post subject: | |
I think he was asking why one set of part numbers for the clutch springs say .9. 1.0, and 1.1 but another set of part numbers list them as soft, med, and hard. What he wants to know is what is the difference in these two part numbers and why is the second set of part numbers that list them as soft, med, and hard more expensive than the previous set of part numbers that list them as .9, 1.0, and 1.1. I'm not sure myself. I do know that the EC kit is supposed to have revised clutch springs that prevent them from breaking as much so maybe that is what the new part numbers represent. I haven't looked up the part numbers myself so I don't know. |
Author: | Jason Branham [ Thu Apr 19, 2007 14:48:03 ] |
Post subject: | |
Author: | sneh [ Fri Apr 20, 2007 03:17:54 ] |
Post subject: | |
Author: | Rocco Margiotta [ Fri Apr 20, 2007 05:24:21 ] |
Post subject: | |
They didn't bring them out "for" the EC just timing I guess... Ralph said something about them changing the bend and length so they're less likely to break (its a visible change in the springs). |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |