| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Hudy setup system and rear toe https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5128 |
Page 1 of 1 |
| Author: | sllo [ Wed Mar 07, 2007 08:56:27 ] |
| Post subject: | Hudy setup system and rear toe |
I set the rear toe in of my XB8TQ to 3 degrees by using the 0 eccentric bushings. However, using the hudy setup system to measure the rear toe I found out that it is 2.5 degrees instead of 3 degrees. Has anyone noticed something similar? |
|
| Author: | rallyraid [ Wed Mar 07, 2007 09:24:04 ] |
| Post subject: | |
the rear toe will change slightly with other rear suspension settings. i read that on here somewhere |
|
| Author: | dbarnes [ Thu Mar 08, 2007 05:11:48 ] |
| Post subject: | |
Yep. The rear toe will change depending on whether you have the rear hubs forward or back on the rear arms. |
|
| Author: | low10s [ Thu Mar 08, 2007 05:40:40 ] |
| Post subject: | |
sometimes the hub can be off also. i put mine on the hudy board and one side was 2.75 and the other 3. same inserts. i put brand new inserts in and the same thing the right side had more toe than the left. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|