XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xb8 Luxury Aluminium Knuckles https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=5069 |
Page 1 of 1 |
Author: | Xb8 Boy [ Sat Feb 24, 2007 00:16:04 ] |
Post subject: | Xb8 Luxury Aluminium Knuckles |
hi guys, just picked these up for my xb8 and have done a search but got mixed comments for it. will i have to shim these at the pivot balls or on the ackerman plate? im running the xb8 luxury nor the r or tq thanks for your help people ![]() |
Author: | Jason Branham [ Sat Feb 24, 2007 00:36:13 ] |
Post subject: | |
Nope, just run them as they come. |
Author: | Xb8 Boy [ Sat Feb 24, 2007 22:37:17 ] |
Post subject: | |
Author: | Xb8 Boy [ Mon Feb 26, 2007 17:50:55 ] |
Post subject: | |
Author: | ajoiner490 [ Mon Feb 26, 2007 18:01:18 ] |
Post subject: | |
Author: | Xb8 Boy [ Tue Feb 27, 2007 13:55:21 ] |
Post subject: | |
cheers dude ![]() ok, just got these today and started to fit them. one thing i noticed is there is no nylon nut in the knuckle where the pivot ball screws into, like on the plastic ones. are you guys just using a nylon lock nut on the other side? looks to me the nylon nut sticks out to far and rubs on the arm i got these 2nd hand and they only come with bb bushings and knuckles thank you Xb8 Boy |
Author: | ajoiner490 [ Tue Feb 27, 2007 17:23:41 ] |
Post subject: | |
Author: | Keith [ Tue Feb 27, 2007 17:34:20 ] |
Post subject: | |
Tighten the locknut so that one of the flat sides of the nut will come up against the arm,,,,and not ont of the hex points. (the point of the nut will dig in to the arm and groove it). I had a locknut that would dig into the arm and hold the suspension up for a brief second during a bouncing turn. option 2 is to set your endpoint adj so it wont hit. |
Author: | ajoiner490 [ Tue Feb 27, 2007 17:50:06 ] |
Post subject: | |
Author: | Keith [ Tue Feb 27, 2007 18:19:28 ] |
Post subject: | |
LOL! |
Author: | 180 booker [ Tue Feb 27, 2007 18:42:02 ] |
Post subject: | |
i think adam likes to dremel. ![]() |
Author: | ajoiner490 [ Tue Feb 27, 2007 18:54:18 ] |
Post subject: | |
I'm a member of Team Dremel. I think they are accepting applications ![]() |
Author: | speed metal [ Tue Feb 27, 2007 19:46:46 ] |
Post subject: | |
Author: | Xb8 Boy [ Wed Feb 28, 2007 01:39:08 ] |
Post subject: | |
Author: | Robin Frischkopf [ Wed Feb 28, 2007 01:50:28 ] |
Post subject: | |
Author: | Xb8 Boy [ Wed Feb 28, 2007 02:13:41 ] |
Post subject: | |
yup, already locked up with thread-lock. should be fine ![]() thanks |
Author: | Keith [ Wed Feb 28, 2007 20:08:50 ] |
Post subject: | |
Author: | ajoiner490 [ Thu Mar 01, 2007 16:37:38 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |