| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Play in Suspension Arms https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4894 |
Page 1 of 1 |
| Author: | Kane-o [ Thu Jan 25, 2007 01:23:55 ] |
| Post subject: | Play in Suspension Arms |
Hey All, I was just finishing building my TQ and want to know what kind of front/back play is accceptable in the suspension arms. The rear arms move free with both a 2mm and 1mm shim, but the front is bound up if I put a 1mm shim in addition to the 2mm one already on the hingepin. I am assuming some play is acceptable. Thanks in advance. -Kane |
|
| Author: | ajoiner490 [ Thu Jan 25, 2007 03:53:11 ] |
| Post subject: | |
| Author: | 180 booker [ Thu Jan 25, 2007 04:09:39 ] |
| Post subject: | |
| Author: | ajoiner490 [ Thu Jan 25, 2007 22:00:34 ] |
| Post subject: | |
| Author: | guy02 [ Fri Jan 26, 2007 16:06:46 ] |
| Post subject: | |
just allow a minimum of play by using a smaller or bigger or an extra clip or use some small metalor plastic O-shimm |
|
| Author: | Robin Frischkopf [ Mon Jan 29, 2007 00:27:20 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|