XRAY - Model racing cars

Hello.
Thanks for your help ajoiner490.
Other cars are better on those points.
But, I don’t like use parts from other brands on XB8. Because I see great XB8s drivers around the world using only (or the most) Xray parts with great results. I need to do better work on my cars. So, since the first XB8 till now, I have this little problem on my set ups. I’m doing something wrong, but I don’t know what!
I will test the car with some work on springs too.
Thanks again.

Adam,
I'm curious on the Jammin Red springs? I know many RC America drivers are using them now? I'm in test mode right now preping for the 07 Nitro Challenge.

Are they stiffer than the light blues? What change did it bring to the car? Thanks in adance,
BM

we have been using the stock rear tq springs with mugen grey fronts. and it has been working good.

Brian,

They made the car easier to drive; more stable on the tracks down here. At Finals on a really hard-packed track, they were a little too soft. I'm not sure off the top of my head where they rate compared to the light blues, but TWF8 has all the spring tensions listed for all the springs. Check it out over there.