| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Where or who to get sleeve resized? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4776 |
Page 1 of 1 |
| Author: | Richmond [ Wed Jan 03, 2007 06:30:08 ] |
| Post subject: | Where or who to get sleeve resized? |
Can someone give me info on where to get my sleeve resized? How would you know when to resize anyway? Thanks in advance. |
|
| Author: | Barkley Abernethy [ Wed Jan 03, 2007 08:24:14 ] |
| Post subject: | |
its not i road i would go down nearly impossible to get perfect nice new one or another engine if you need it . |
|
| Author: | raceman17 [ Wed Jan 03, 2007 15:10:39 ] |
| Post subject: | |
www.rayaracing.com and osracketracing.com. I have used both. My P5 was pinched by rayaracing and has about 3 gallons on it since the resizing and shows NO signs of giving up anytime soon. Later |
|
| Author: | Richmond [ Wed Jan 03, 2007 23:44:42 ] |
| Post subject: | |
How can I really tell that my sleeve needs to be re-pinched anyway? I feel a slight resistance when going tdc with the glow plugs out on non-operating temp. What is the ideal fitting for the sleeve after two gallons? |
|
| Author: | Barkley Abernethy [ Thu Jan 04, 2007 00:06:19 ] |
| Post subject: | |
i have engines with 16 gallon on them with the same piston and liner .most engines that are worn will cut out when at normal operating temp ... if you want to be top notch then when the engine is at 220f with the glow plug in use the thumb and index finger and turn the flywheel when the piston hits tdc if there is little to no resistance then its time to do something.......if your not sure head for a guy at your local track there is always one |
|
| Author: | crotolus [ Sat Jan 06, 2007 07:03:53 ] |
| Post subject: | |
| Author: | low10s [ Sat Jan 06, 2007 14:54:45 ] |
| Post subject: | |
| Author: | sonic27 [ Sun Jan 07, 2007 03:57:29 ] |
| Post subject: | |
www.ceopowermods.com in California. |
|
| Author: | dsavin [ Sun Jan 07, 2007 22:05:21 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|