| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| lipo https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=467 |
Page 1 of 1 |
| Author: | idar66 [ Tue Nov 16, 2004 09:32:31 ] |
| Post subject: | lipo |
hi my pack that came with kit dropped its lunch after second charge, ive gone too 1400 mah lipo im running ko pro po digital pds servos, ive also got a hot bodies 2 that i run hitec in steering and futaba in the throttle, both are digital as well, before lipo i used team magic 1200 mah with servos listed above, could you plz tell me why nimh cant be used with futaba servos, and if anyone knows any problems with running lipo, cheers  vmaz, nz
|
|
| Author: | imaxx21 [ Tue Nov 16, 2004 09:38:36 ] |
| Post subject: | |
isnt lipo more than 6 volts..... need some kind of regulator, no? |
|
| Author: | idar66 [ Tue Nov 16, 2004 10:39:16 ] |
| Post subject: | lipo |
| Author: | David Joor [ Wed Nov 17, 2004 19:48:39 ] |
| Post subject: | |
| Author: | imaxx21 [ Wed Nov 17, 2004 21:16:39 ] |
| Post subject: | |
| Author: | David Joor [ Wed Nov 17, 2004 23:06:00 ] |
| Post subject: | |
How does the runtime compare to the 2400 AA packs? What is the weight compared to the 1100 pack that comes with the Xray? What charger do you have to use? Can someone please help me!?!? LOL 
|
|
| Author: | idar66 [ Thu Nov 18, 2004 00:05:36 ] |
| Post subject: | re lipo |
hi sorry ive taken so long to relpy , the lipo i use is 62.7 gram, and 51 mm long , 17.5 wide, the lipo batterys are suppose to last 2-3 times longer than nicd or nimh, also seems to depend on charger and what software runs it, also have found out that the regulaters i was going to buy only run at 5 volt max, and i want six volt, the company is just realising a new one that will do both, www.fmadirect.com , will kepp you posted, cheers vmax 
|
|
| Author: | Mike Dana [ Thu Nov 18, 2004 00:07:52 ] |
| Post subject: | |
DJ you got PM |
|
| Author: | idar66 [ Thu Nov 18, 2004 03:12:58 ] |
| Post subject: | lipo |
hi have gone with a regulator that does 6 volt heres the website http://www.firmtronics.com/ they make two models one 5volt and the sbec is 6 volt, with the regulators it should be great, ive really enjoyed the long runtimes, just under 2 hrs at .5 amp from 7.4 volt 1400 mah li po and the cells are only getting better, also i use the triton computer charger ,seems to be alright for a cheap charger, cheers vmax
|
|
| Author: | RastaForI [ Thu Nov 18, 2004 17:44:25 ] |
| Post subject: | Futaba Digital Servos with NiMH |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|