| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Rear Al. Hubs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4419 |
Page 1 of 1 |
| Author: | twigstoy [ Fri Oct 27, 2006 15:09:45 ] |
| Post subject: | Rear Al. Hubs |
| Author: | bit047 [ Fri Oct 27, 2006 17:39:29 ] |
| Post subject: | |
| Author: | twigstoy [ Fri Oct 27, 2006 18:09:32 ] |
| Post subject: | |
| Author: | bit047 [ Fri Oct 27, 2006 18:30:41 ] |
| Post subject: | |
| Author: | twigstoy [ Fri Oct 27, 2006 18:55:58 ] |
| Post subject: | |
| Author: | mario [ Fri Oct 27, 2006 19:19:06 ] |
| Post subject: | |
| Author: | bit047 [ Fri Oct 27, 2006 19:23:29 ] |
| Post subject: | |
I know what you mean I had trounle at first but if you hold the hubs as the pics and follow the diagram..It will all make sense..ok find the #2 insers there should 4 of them...then place the inserts in as described per diagram the left hub will have the #2 down front and back...and the right will have the #2 up front and back...those pics are are for front and back of hubs..all you have to do is make sure that you follow that sheet carefully....hope this helps...thanks |
|
| Author: | twigstoy [ Fri Oct 27, 2006 19:50:12 ] |
| Post subject: | |
Thanks bit, you can understand what I am saying.. What had me confused is, the bag of inserts only comes with (2) of the same number inserts. So you must have to buy (2) bags of inserts. Right... |
|
| Author: | twigstoy [ Fri Oct 27, 2006 19:55:29 ] |
| Post subject: | |
Mario, What does outboard really do????? |
|
| Author: | bit047 [ Fri Oct 27, 2006 20:03:42 ] |
| Post subject: | |
yes you must have 2 inserts of the same numbers per side..did you buy it new or was it used?..beacause if you bought it new both hubs come with its own set of inserts.. |
|
| Author: | twigstoy [ Fri Oct 27, 2006 21:13:52 ] |
| Post subject: | |
used. I have enough 0's, just not 2's |
|
| Author: | sneh [ Sat Oct 28, 2006 02:38:16 ] |
| Post subject: | |
| Author: | WheelNut [ Sat Oct 28, 2006 04:22:13 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|