XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Help! My shocks wont rebound... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4406 |
Page 1 of 1 |
Author: | mega_stream [ Tue Oct 24, 2006 17:09:55 ] |
Post subject: | Help! My shocks wont rebound... |
Author: | daveg [ Tue Oct 24, 2006 17:32:12 ] |
Post subject: | |
Author: | mega_stream [ Tue Oct 24, 2006 22:45:28 ] |
Post subject: | |
Author: | daveg [ Tue Oct 24, 2006 22:51:08 ] |
Post subject: | |
Author: | slim [ Wed Oct 25, 2006 00:02:55 ] |
Post subject: | |
Author: | Rosco [ Wed Oct 25, 2006 18:43:05 ] |
Post subject: | |
Author: | mega_stream [ Wed Oct 25, 2006 19:03:38 ] |
Post subject: | |
I did it as instructed on the link below... So this isn't right then? Looks like I'll be taking them apart again! |
Author: | Robsie71 [ Thu Oct 26, 2006 00:50:15 ] |
Post subject: | |
I saw something similar on a TQ at the weekend. It seemed that the black plastic piston was slightly too large for the shock body and when installed the shock did not move freely. Does the shock move smoothly when you move it up and down? The solution at the weekend was to use one of my white plastic pistons from my XB8 and it worked a treat after that. Hope this helps Nick |
Author: | mega_stream [ Thu Oct 26, 2006 08:00:09 ] |
Post subject: | |
Author: | Turanden [ Fri Oct 27, 2006 04:39:18 ] |
Post subject: | |
Author: | sneh [ Sat Oct 28, 2006 02:42:28 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |