Hello my fellow XRay fans! I'm absolutely loving my XB8 except for one problem... Whn I'm accelerating, the rear end wants to come around (fishtailing). Here's my setup (what I can remember anyways
) :
Shocks
- oils F: 50 wt, R: 40
- pistons straight 1.5 holes
- Springs = RMV soft progressive rate springs
Diff Oils
- Front Diff = 7,000
- Centre Diff = 10,000
- rear Diff = 5,000
Rear Suspension Geometry
- 0* anti-squat
- 0.5* negative camber
- top shock postition = 2nd last outside-top hole
- bottom shock position = inner-most hole
I'm running an RB Mods RB C6 BB with a 13 tooth CB and an Orion V6 Adjustable Clutch set to emulate the operation of 1.1 clutch springs.
Everytime I come out of a corner, straighten out and hit the throttle the tires spin and the rearend wants to swing out to the right. Now this happens everytime the tires spin and I'm pointing straight. I want to eliminate this fishtailing. Does anyone have any suggestions? I was thinking abouty maybe adding more Anti-Squat. What I don't want is to make my buggy push. I love the way it turns. I want to keep that quality intact and eliminate the fishtailing.
Any help would be greatly appreciated!!
regards
speed metal
.