XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB8TQ shock piston...how'd mine get bent? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4357 |
Page 1 of 1 |
Author: | mega_stream [ Sat Oct 14, 2006 22:48:53 ] |
Post subject: | XB8TQ shock piston...how'd mine get bent? |
Must say I am disappointed with this, my front shaft has some how managed to get bent...I really can't see how this happened due to the other associated parts being fine and untouched? The shaft doesn't look bent, but won't travel up and down easily - anyone else has a similar thing, have never jumped the buggy so not been abused. Are the TQ's shafts the same as the stock XB8? - my LHS suggested the TQ might be titanium ones. |
Author: | daveg [ Sat Oct 14, 2006 23:05:03 ] |
Post subject: | |
are you sure its the damper rod and not the piston thats tight inside the shock body? you will have to strip the shock down and roll the damper rod on a flat piece of glass,mirror or such like to see if its bent,if not i suspect its the piston which is tight. good luck dave |
Author: | Scott [ Sat Oct 14, 2006 23:40:00 ] |
Post subject: | |
Author: | mega_stream [ Sun Oct 15, 2006 09:14:26 ] |
Post subject: | |
Author: | daveg [ Sun Oct 15, 2006 11:57:41 ] |
Post subject: | |
Author: | ajoiner490 [ Sun Oct 15, 2006 15:03:36 ] |
Post subject: | |
Author: | mega_stream [ Sun Oct 15, 2006 18:43:07 ] |
Post subject: | |
Author: | daveg [ Sun Oct 15, 2006 19:47:37 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |