| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8R and XB8TQ Handling https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4246 |
Page 1 of 1 |
| Author: | aimans [ Wed Sep 20, 2006 06:02:57 ] |
| Post subject: | XB8R and XB8TQ Handling |
| Author: | Rosco [ Wed Sep 20, 2006 06:46:41 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Wed Sep 20, 2006 16:05:14 ] |
| Post subject: | |
| Author: | aimans [ Thu Sep 21, 2006 04:06:32 ] |
| Post subject: | |
Thanks Rocco for your explaination. But my R Kit is using TQ Front and Rear Arm, Alu suspension Holder ISS set and Alu Rear Brace. I also have Front Torque Brace which is not installed at the moment. Other parts that would make a different to handling would be Front and Rear Shock Tower, CVD's, Alu Radio Plate and Alu Upper Plate, not sure about other parts. My Clutch Bell is 13T and Center Diff Spur gear is 44T which should be the same as TQ unless it come with 45T or 46T. When u say it is geared up higher then TQ, what do you mean by that? Can you explain in more detail. Thanks. |
|
| Author: | Knighthawk [ Thu Sep 21, 2006 06:28:09 ] |
| Post subject: | |
Tq's are fitted with the 46 tooth center drive gear! |
|
| Author: | Rocco Margiotta [ Thu Sep 21, 2006 23:00:00 ] |
| Post subject: | |
| Author: | aimans [ Fri Sep 22, 2006 05:22:09 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Fri Sep 22, 2006 16:57:05 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|