| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Gas Chamber on Buggies https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4113 |
Page 1 of 1 |
| Author: | WalawalaStore [ Fri Aug 25, 2006 09:29:50 ] |
| Post subject: | Gas Chamber on Buggies |
Hi,  Gas Chamber is placed on the silicone pipe between the exhaust pipe and fuel tank.
In 1/8 on road and off road, I have seen people installing this gas chamber while some don't. Some use another "empty" fuel filter to do the job. Have any one experienced what the effects are when using on 1/8 nitro buggies? When the gas chamber should be used? Any answer is appreciated but pls no wild guess. Thx 
Joaquim |
|
| Author: | nitroracer [ Fri Aug 25, 2006 17:06:58 ] |
| Post subject: | |
| Author: | WalawalaStore [ Sat Aug 26, 2006 08:16:38 ] |
| Post subject: | |
| Author: | 180 booker [ Sat Aug 26, 2006 14:33:18 ] |
| Post subject: | |
would that be the same as putting a fuel filter on the pressure line then? wondering if someone has a picture of this as i am confused on what you are talking about. 
|
|
| Author: | ajoiner490 [ Sat Aug 26, 2006 15:01:13 ] |
| Post subject: | |
Same thing Booker. Take a look at a Sportwerks Mayhem buggy, I believe they come with a hollow fuel filter on the pressure line. Only buggy I've ever seen with one. |
|
| Author: | WalawalaStore [ Sun Aug 27, 2006 17:58:50 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|