Been there, done that..
well not quite but not too far!
Have fun with it and ask more if ya cant solve the probs.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Flywheel/flywheel collar problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4032 |
Page 1 of 1 |
| Author: | mekong56 [ Sat Aug 12, 2006 19:19:50 ] |
| Post subject: | Flywheel/flywheel collar problem |
I have a question about the assembly of the flywheel. When you put the flywheel collar (#35 8540) in the flywheel (#35 8531), how far in is it supposed to sit into the flywheel? Flush with the top side (the side with the pins)? The problem is that even with no shims on the back side of the flywheel collar (#35 8540), it doesn't leave any threads exposed on the motor shaft to grab onto for the Flywheel nut (#35 8550). This is on a Novarossi P5X motor. What am I doing wrong here? Thanks! |
|
| Author: | BuggyRaycer [ Sat Aug 12, 2006 21:46:40 ] |
| Post subject: | |
Is there any pics you can provide? It's not flush with the flywheel but kinda close. Sounds like the shaft has been cut, has it? |
|
| Author: | mekong56 [ Sat Aug 12, 2006 23:39:45 ] |
| Post subject: | |
Nevermind, I figured it out. Let's just say it was pure stupidity on my part. It's my first nitro experience. The motor came with a collar already on it, and I was trying to put the one that came in the XB8 kit on too, so I had double collars. Man, this is almost too embarassing to admit!!! Thanks anyways. |
|
| Author: | Sami L [ Sat Aug 12, 2006 23:56:20 ] |
| Post subject: | |
Been there, done that.. well not quite but not too far!
Have fun with it and ask more if ya cant solve the probs. |
|
| Author: | WalawalaStore [ Fri Aug 18, 2006 05:45:04 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|