XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Steering Mod https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4027 |
Page 1 of 1 |
Author: | Wired [ Sat Aug 12, 2006 02:45:39 ] |
Post subject: | Steering Mod |
Author: | rysulrod [ Sat Aug 12, 2006 03:29:01 ] |
Post subject: | |
There is a guide on how to do this *with* pictures on this very forum. Scroll down a little and see: Steering Throw Modification (Increase) By David Joor It's to get more throw then you run without droop screws. You just check where the arm binds and dremel away a small portion on the arm and the C hub until you reach full throw. It isnt a good race day unless the Dremel has come out! ![]() |
Author: | clubin [ Sat Aug 12, 2006 04:11:01 ] |
Post subject: | |
Hey wired, where did you buy your buggy & Next time you're in Gimli, we'll bash. |
Author: | Wired [ Sat Aug 12, 2006 04:40:05 ] |
Post subject: | |
I don't bash the XB8, just race it. But if you want, come out to the Mid-Canada Classic next weekend here in Winnipeg. I bought it through Eliminator RC here in Winnipeg. Check it out http://www.eliminator-rc.com http://www.midcanadarcautoracing.com/ |
Author: | clubin [ Sun Aug 13, 2006 04:48:46 ] |
Post subject: | |
I think i'll take you up on that, what time. Is Mid canada is on Fermor by the east perimiter? I would love to race but "no time" you know family 1st. Oh yah what engine are you running on your xb8. THOUGHT I WOULD CLECK THE MID CANADA LINK AFTER I WROTE THIS REPLY I KNOWWHERE IT IS. |
Author: | Wired [ Sun Aug 13, 2006 16:54:13 ] |
Post subject: | |
The Mid-Canada track is located at Grand Prix amusements just inside the east perimeter. There is info on the website as to what classes are being run. I am running a EB Mod V-Spec, 2050 pipe, Ace RC Digital servos. The 2 other XRays that run the track week in and week out run a JP Mod V-Spec (TQ), and an RB Mod(XB8). |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |