XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Anti roll bars https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=4004 |
Page 1 of 1 |
Author: | Fulcrum [ Sun Aug 06, 2006 22:36:35 ] |
Post subject: | Anti roll bars |
Dumb / lazy question coming up here.... Anyone tell me what the stock (supplied in the TQ kit) anti roll bar sizes are??? front and back... I've looked but cant find it...thanks in advance ![]() |
Author: | Keith [ Mon Aug 07, 2006 00:13:32 ] |
Post subject: | |
front: 2.4mm, rear: 2.8mm Just FYI, the last two digits of the roll bar part number designates the size. Example: front roll bar part number is 35 2424. the last two digits of that part number are 24, which designates 2.4. I dont know if it was planned that way, but it works out. I have waaay to much time on my hands ![]() |
Author: | nitroracer [ Mon Aug 07, 2006 05:14:02 ] |
Post subject: | |
I thought the rear was 2.6? |
Author: | Keith [ Mon Aug 07, 2006 06:06:12 ] |
Post subject: | |
Mine is 2.8mm, spare parts list says 2.8mm. |
Author: | Fulcrum [ Mon Aug 07, 2006 08:41:44 ] |
Post subject: | |
Author: | ajoiner490 [ Mon Aug 07, 2006 15:51:13 ] |
Post subject: | |
No, the rear swaybar is longer/wider than the front. |
Author: | Fulcrum [ Mon Aug 07, 2006 22:19:58 ] |
Post subject: | |
thanks all... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |