XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Using a Larger Spur Gear or Smaller Clutchbell https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3924 |
Page 1 of 1 |
Author: | nitroracer [ Fri Jul 21, 2006 18:21:06 ] |
Post subject: | Using a Larger Spur Gear or Smaller Clutchbell |
Author: | ajoiner490 [ Sat Jul 22, 2006 18:45:28 ] |
Post subject: | |
Author: | Keith [ Sat Jul 22, 2006 21:43:29 ] |
Post subject: | |
Author: | Rocco Margiotta [ Mon Jul 24, 2006 18:47:17 ] |
Post subject: | |
The shims are needed for the larger spur gear, as the 48T will hit the chassis without the 35 4032 center diff shims. As far as gearing goes, Xray does not offer a 12T clutch bell. What I'm thinking about doing (but too lazy to rip my car apart and do it, haha) is running the 48T spur with the 14T clutch bell which will make the gear ratio a little higher, but since the gears are bigger, you will get a little more torque so it you should maintain most of the bottom end, but will get a little more top end. I'll try it this week and see what happens. |
Author: | nitroracer [ Mon Jul 24, 2006 18:59:01 ] |
Post subject: | |
So Rocco are the new alloy diff mounts the same size as the stock ones or will I need the shims when using the 48 tooth with the alloy mounts as well? And do you guys have the yellow wheels in stock so I can get my supplier to order them? |
Author: | Rocco Margiotta [ Mon Jul 24, 2006 19:07:27 ] |
Post subject: | |
I'm almost positive they are the same size because you still need the shims on them to use the 48T spur gears. We do have the yellow wheels in stock, but you should convince them to buy a bunch of pink wheels too! ![]() |
Author: | ajoiner490 [ Tue Jul 25, 2006 17:27:07 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue Jul 25, 2006 17:54:58 ] |
Post subject: | |
Author: | Joe G [ Tue Jul 25, 2006 21:09:09 ] |
Post subject: | |
Author: | Wrayth [ Mon Mar 02, 2009 20:42:13 ] |
Post subject: | Gear ratios and spur an clutch bell size? |
Author: | Rocco Margiotta [ Mon Mar 02, 2009 22:30:52 ] |
Post subject: | |
Author: | domekat [ Tue Mar 03, 2009 15:15:01 ] |
Post subject: | |
So is there a larger spur gear than 48T for XT8 |
Author: | Rocco Margiotta [ Tue Mar 03, 2009 17:14:50 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |