I purchased mine from amainhobbies.com . I also know that carolinasrc.com also sells them
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| How to setup starter box for XB8? OFNA box https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3760 |
Page 1 of 2 |
| Author: | Grayalf [ Sat Jun 10, 2006 13:28:50 ] |
| Post subject: | How to setup starter box for XB8? OFNA box |
Can anyone direct me on how to setup an OFNA 10247 starter box on an 1/8 XB8R kit. Where do the four pins line up? Please give details or photos if you have one. Thanks |
|
| Author: | ajoiner490 [ Sat Jun 10, 2006 15:40:26 ] |
| Post subject: | |
Use them to line up the chassis, not the arms. Put two in the front where the chassis narrows right before the front end, and two at the rear where it narrows right before the rear end. Hope this helps??? -Adam |
|
| Author: | nitroracer [ Sat Jun 10, 2006 18:22:34 ] |
| Post subject: | |
Yep, that's exactly where I had mine. But I ditched it and now use the TKO starter plate. It's much easier. |
|
| Author: | BuggyRaycer [ Mon Jun 12, 2006 04:04:50 ] |
| Post subject: | |
| Author: | nitroracer [ Mon Jun 12, 2006 05:18:05 ] |
| Post subject: | |
| Author: | eenascar [ Mon Jun 12, 2006 17:06:12 ] |
| Post subject: | starter plate |
where did ya get the starter plate? and i wish i could get mine to pit she says she might brake a nail |
|
| Author: | nitroracer [ Mon Jun 12, 2006 18:04:57 ] |
| Post subject: | |
| Author: | BuggyRaycer [ Tue Jun 13, 2006 08:09:02 ] |
| Post subject: | |
I purchased mine from amainhobbies.com . I also know that carolinasrc.com also sells them
|
|
| Author: | ajoiner490 [ Tue Jun 13, 2006 17:39:53 ] |
| Post subject: | |
I just made my own .
|
|
| Author: | BuggyRaycer [ Tue Jun 13, 2006 18:41:46 ] |
| Post subject: | |
I wanted to do that due to I know you could do it yourself for a lot cheaper but finding the time costs even more if you know what i mean 
|
|
| Author: | ajoiner490 [ Tue Jun 13, 2006 19:15:52 ] |
| Post subject: | |
My dad has a mill & lathe in our garage, took about 20 minutes to machine out of nylon resin I got from a buddy. |
|
| Author: | 180 booker [ Sat Jun 24, 2006 00:20:12 ] |
| Post subject: | |
| Author: | Keith [ Sat Jun 24, 2006 18:07:52 ] |
| Post subject: | |
| Author: | geezatec [ Sat Jun 24, 2006 18:31:19 ] |
| Post subject: | |
| Author: | Keith [ Sat Jun 24, 2006 18:39:07 ] |
| Post subject: | |
| Author: | geezatec [ Sat Jun 24, 2006 19:38:18 ] |
| Post subject: | |
| Author: | nitroracer [ Sat Jun 24, 2006 20:08:44 ] |
| Post subject: | |
| Author: | Keith [ Sun Jun 25, 2006 17:28:25 ] |
| Post subject: | |
Went to the RCPS in Canby OR on Sat. Split desicion on mounting the TKO plate, some had used velcro, some had it bolted down. One guy I talked to said that he had used HD velcro, but the plate still moved around a bit. (maybe didnt use enough velcro) Once I get the plate I'll have to figure out a way. No way am I going to KIS,, I need to throw it across the shop a few times before I feel good about it. lol. |
|
| Author: | geezatec [ Sun Jun 25, 2006 18:29:16 ] |
| Post subject: | |
lol!! Which ever way you'd do!!! I think you'll do the easy way!! just KIS it!!!lol!! Later friend!!! lol!! 
|
|
| Author: | Keith [ Fri Jul 21, 2006 18:59:43 ] |
| Post subject: | |
Ok, I figured out a way to hold my TKO plate to the box. There,,that should hold it,,
|
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|